Sokkia DX-103AC 3" Auto-Pointing Reflectorless Total Station
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
|
* Sokkia DX-103AC 3" Auto-Pointing Reflectorless Total Station (BC# -L/T*) |
Sokkia DX-103AC 3" Auto-Pointing Reflectorless Total Station
The Sokkia DX-103AC is a 3-second auto-pointing reflectorless total station used for surveying, construction layout, and site measurement. It measures horizontal and vertical angles together with distances, allowing crews to calculate point positions, document existing features, and set out locations from a design.
Its Direct Aiming technology automatically sights a prism after the operator roughly aims the instrument and starts a measurement. This reduces the time spent manually centering on each target, especially when collecting many points. The motorized drive makes the DX-103AC useful for topographic surveys, control work, and repeated layout measurements.
The DX-103AC can also measure directly to suitable surfaces without a prism. This is helpful for walls, building corners, and other points that are difficult to reach. Sokkia specifies a reflectorless range of 0.3 to 800 meters under average conditions and up to 1,000 meters under good conditions. With one AP prism, the specified range is up to 5,000 meters under average conditions.
A 30× telescope helps the operator sight targets, while a dual-axis compensator accounts for small amounts of instrument tilt. The instrument’s 3-second angle accuracy supports a wide range of professional survey and construction tasks. Its color touchscreen and onboard MAGNET Field software let users collect points, carry out stakeout, and perform field calculations.
Built for use on active job sites, the DX-103AC has an IP65-rated housing for dust and water protection. Bluetooth communication supports use with a compatible field controller. By combining automatic prism aiming, reflectorless measurement, and onboard data collection, it helps crews move efficiently from field observations to usable survey data.
Features:
- 3″ angle accuracy for surveying and construction layout
- Direct Aiming auto-pointing that automatically sights a prism after rough aiming
- Motorized drive with a maximum rotation speed of 70° per second
- Reflectorless measurement from 0.3 to 800 m under average conditions, or up to 1,000 m under good conditions
- Prism measurement up to 5,000 m with one AP prism under average conditions
- 30× telescope for sighting targets
- Dual-axis compensator to account for small amounts of instrument tilt
- Color touchscreen and backlit keypad
- Onboard MAGNET Field software for point collection, stakeout, and calculations
- Bluetooth communication with a compatible field controller
- IP65 dust and water protection for job-site use
| Specification | Sokkia DX-103AC |
|---|---|
| Instrument type | Motorized, auto-pointing reflectorless total station |
| Angle accuracy | 3″ |
| Telescope magnification | 30× |
| Minimum focus distance | 1.3 m (4.3 ft) |
| Reflectorless measuring range | 0.3–800 m (1–2,620 ft) under average conditions |
| Reflectorless range under good conditions | Up to 1,000 m (3,280 ft) |
| Range with one AP prism | 1.3–5,000 m (4.3–16,400 ft) under average conditions |
| Reflectorless distance accuracy | ±(2 mm + 2 ppm × distance) |
| Prism distance accuracy | ±(1.5 mm + 2 ppm × distance) |
| Auto-pointing range with one AP prism | 1.3–1,000 m (4.3–3,280 ft) |
| Motor drive | DC servo motor |
| Maximum rotation speed | 70° per second |
| Tilt compensation | Dual-axis; ±6′ working range |
| Display and controls | Color touchscreen and backlit 26-key keypad |
| Onboard software | MAGNET Field |
| Data connection | USB Type-A/B |
| Wireless communication | Bluetooth Class 1 |
| Dust and water protection | IP65 |