Trimble SPS750 Modular GPS Receiver

Quick Overview

The Trimble SPS750 Modular GPS Receivers are ideal for semi-permanent or permanent base station setups, as well as for rover applications such as mounted in a marine vessel or site supervisor’s vehicle. 

* Trimble SPS750 MAX Base & Rover Receiver P/N: 58804-90-10 w/ Options... [ID- X3698]
- L2 Tracking
- Moving Base
- Everest
- VRS
- NMEA
- OmniSTAR-HP
- CMR Inputs
- CMR Outputs
- RTCM Inputs
- RTCM Outputs
- Data Collector
- Moving Bae
- Bluetooth
- UHF Transmit
- LBand
- Enable Webserver
- Hardware Version: 1.0
- Firmware Option
- Downgrade Limit: 310
- Max Data Rate: 10Hz
- Firmware Options
- 900Mhz Internal Radio
- Factory Serviced

SKU: SPS750
Item ID: X3698
Condition: Refurbished
Warranty: 90 Day Exchange
$3,895.00
OR

Included

* Trimble SPS750 MAX Base & Rover Receiver P/N: 58804-90-10 w/ Options... [ID- X3698]
         - L2 Tracking
         - Moving Base
         - Everest
         - VRS
         - NMEA
         - OmniSTAR-HP
         - CMR Inputs
         - CMR Outputs
         - RTCM Inputs
         - RTCM Outputs
         - Data Collector
         - Moving Bae
         - Bluetooth
         - UHF Transmit
         - LBand
         - Enable Webserver
         - Hardware Version: 1.0
         - Firmware Option
         - Downgrade Limit: 310
         - Max Data Rate: 10Hz
         - Firmware Options
         - 900Mhz Internal Radio
         - Factory Serviced
* Trimble Multi-Port Adapter
* AC Adapter/Charger
* Power Cord
* RS232 PC Interface Cable
* User Manual On CD
* Carrying Case [G]

Details

Trimble SPS750 MAX 900Mhz Base & Rover Receiver

 

Installed Options
SPS750 Max Base/Rover
- L2 Tracking
- Moving Base
- Everest
- VRS
- NMEA
- OmniSTAR-HP
- CMR Inputs
- CMR Outputs
- RTCM Inputs
- RTCM Outputs
- Data Collector
- Moving Bae
- Bluetooth
- UHF Transmit
- LBand
- Enable Webserver
- Hardware Version: 1.0
- Firmware Option
- Downgrade Limit: 310
- Max Data Rate: 10Hz
- Firmware Options
- 900 Mhz Internal Radio

 


Trimble SPS750 Modular GPS Receiver

Flexible modular receiver for permanent base station, supervisor’s systems and rover operations


General Description

The Trimble® SPS750 Modular GPS Receiver sets new standards for rapid setup and flexible operation in both base station and rover applications.

Modularity provides the ability to choose the appropriate Global Positioning System (GPS) antenna for the application, Zephyr Geodetic Model 2 at the base station and the Zephyr Model 2 for the mobile units. The GPS and Radio antennas can be mounted high in permanent and semi-permanent base station applications so that they are clear from obstructions and provide maximum radio coverage, while the receiver and radio are locked in a secure environment safe from theft and the weather. The choice of radio antennas allows them to be either attached to the receiver itself for mobile base station and rover applications, or equipped with high gain or directional antenna for maximum range on large job sites.


SPS750 Max Receiver Features
• Base station and rover operation in a single receiver
• Integrated receive/transmit radio
• 5/10 Hz measurement update rate
• Unrestricted rover operational range
• Operates within a VRS network for base station-free rover capability
• Rover operates with OmniSTAR HP or XP services for base station free rover capability with <30cm (1 foot) accuracy
• Supports moving base


Standard System Features
• Integrated GPS receiver and radio
• 450 or 900 MHz with Transmit/Receive capability (Max); 450 or 900 MHz radio option with Transmit or Receive (Basic) capability
• 24-channel L1/L2 GPS receiver
• OmniSTAR XP and HP service capable
• WAAS, EGNOS & MSAS Satellite Based Augmentation Systems (SBAS) compatible
• Tough housing
• IP67 environmental rating
• -40 °C to +65 °C (-40 °F to +149 °F) operating temperature range
• 9V to 30V DC input power range with over-voltage protection
• Long life integrated battery provides >12 hours operation as a base station with internal Transmit/Receive radio, and >16 hours as a rover.
• Integrated display and keypad for system configuration without a controller
• Integrated Bluetooth® for cable-free configuration and operation with a controller
• Choice of external GPS antenna for base station or rover operation
• Rubber duck antenna for rover operations, or external radio antenna for a high gain solution in base station operations
• Small, lightweight design – 1.65 kg (3.64 lbs) (receiver only with battery) 4 kg (8.82 lbs) complete system weight (Rover including controller and rod)
• Permanent or semi-permanent base station, or mobile base station versatility
• ATV, belt, rod, supervisor’s vehicle or marine vessel mounting options for rover applications
• Capable of all site measurement and stakeout operations within 1.5 miles (2.4km) (Basic), >3.0 miles (5km) (Max)
• Easy to use menu system for rapid configuration and status checking
• Autobase for rapid and automated repeated daily base station setups
• Supports IP so it can be configured and checked remotely over the Internet via an Ethernet port
• One base station receiver can broadcast corrections via multiple radio links. For example, broadcast corrections via an internal 450 MHz radio, as well as an external 900 MHz radio from the same base station receiver (Max)


Specifications;

Keyboard and display VFD display 16 characters by 2 rows
On / Off key for one button start up with Autobase
Escape and Enter key for menu navigation
4 arrow keys (up, down, left, right) for option scrolls and data entry
Receiver type Modular GPS receiver
Antenna type Base Station: Zephyr Geodetic Model 2
Rover: Zephyr Model 2
OmniSTAR Rover: Z+ Antenna

Also supports legacy antennas Zephyr, Zephyr Geodetic, Microcentered, Choke ring, Rugged micro-centered for GPS L1/L2
operation only.
Dimensions (L x W x H) 24cm (9.4 in) x 12cm (4.7 in) x 5cm (1.9 in) including connectors
Weight 1.65 kg (3.64 lbs) receiver with internal battery and radio
1.55 kg (3.42 lbs) receiver with internal battery and no radio
Temperature Operating -40 °C to +65 °C (-40 °F to +149 °F)
Storage -40 °C to +80 °C (-40 °F to +176 °F)
Humidity 100%, condensing
Waterproof IP67 for submersion to depth of 1 m (3.28 ft)
Shock and vibration Shock - non operating: Tested and meets the following environmental standards: Designed to survive a 2m (6.6 ft) pole drop onto concrete MIL-STD-810F, Fig.514.5C-17

Shock – operating: To 40 G, 10 msec, saw-tooth MIL-STD-810F, FIG.514.5C-17
Measurements Advanced Trimble Maxwell 5 Custom GPS chip
High-precision multiple correlator for L1 and L2 pseudo-range measurements
Unfiltered, unsmoothed pseudo-range measurements data for low noise, low multi-path error, low time domain correlation and high dynamic response
Very low noise L1 and L2 carrier phase measurements with <1mm precision in a 1 Hz bandwidth
L1 and L2 Signal-to-Noise ratios reported in dB-Hz Proven Trimble low elevation tracking technology
24 Channels L1 C/A Code
L1/L2 Full Cycle Carrier
WAAS / EGNOS / MSAS
Code differential GPS positioning Horizontal accuracy: ±(0.25 m + 1 ppm) RMS, ± (9.84 in + 1 ppm) RMS
Vertical accuracy: ±(0.50 m + 1 ppm) RMS, ± (19.68 in + 1 ppm) RMS
WAAS / EGNOS / MSAS Horizontal accuracy: Typically <1 m (3.28 ft)
Vertical accuracy: Typically <5 m (16.40 ft)
OmniSTAR Positioning XP Service Accuracy: Horizontal 20 cm (7.87 in), Vertical 30 cm (11.80 in)
HP Service Accuracy: Horizontal 10 cm (3.93 in), Vertical 15 cm (5.90 in)
Real Time Kinematic (RTK) positioning Horizontal: ±(10 mm + 1 ppm) RMS, ± (0.38 in +1 ppm) RMS
Vertical: ±(20 mm + 1 ppm) RMS, ± (0.78 in +1 ppm) RMS
Initialization time Regular RTK operation with base station: Single/Multi-base minimum 10 sec + 0.5 times baseline length in km, <30 km
RTK operation with Scalable GPS infrastructure <30 seconds typical anywhere within coverage area (Max option only)
Initialization reliability Typically >99.9%
Power Internal: Integrated internal battery 7.4V, 7800 mA-hr, Li-Ion Internal battery operates as a UPS in the event of external power source outage Internal battery will charge from external power source when input voltage is >15V Integrated charging circuitry

External: Power input on 7 pin 0 shell Lemo is optimized for lead acid batteries with a cut off threshold of 10.5V Power input on the 26 pin DSub connector is optimized for Trimble Li-Ion battery input (PN 49400) with a cut off threshold of 9V Power source (Internal / External) is hot swap capable in the event of power source removal or cut off. 9V to 30V DC external power input with over-voltage protection Receiver will Auto Power On when connected to external power
Power consumption 6.3w, in RTK rover mode with internal receive radio
8.5w, in RTK Base mode with internal transmit radio
Rover operation times on internal battery 450 MHz 2.0W systems: 16 hrs; varies with temperature
900 MHz 1.0W systems: 16 hrs; varies with temperature
Base station operation times on internal battery External radio: 16 hrs; varies with temperature
450 MHz 0.5W systems: 12 hrs; varies with temperature
900 MHz 1.0W systems: 12 hrs; varies with temperature
Certification Class B Part 15, 22, 24 FCC certification
Canadian FCC
CE mark approval
C-tick approval
UN ST/SG/AC.10.11/Rev. 3, Amend. 1 (Li-Ion Battery)
UN ST/SG/AC. 10/27/Add. 2 (Li-Ion Battery)
UN T1 – T8 (Li-Ion Battery)
49 CFR Sections 100-185 (Li-Ion Battery) WEEE
Communications Port 1 (7-pin 0S Lemo): 3-wire RS-232 CAN
Port 2 (DSub 26-pin): Full RS-232 (Via multi-port adapter)
3 –wire RS-232
USB (On the Go) (Via multi-port adapter)
Bluetooth: Ethernet (Via multi-port adapter) (Max only) Fully integrated, fully sealed 2.4 GHz Bluetooth
Integrated Radios Fully integrated, fully sealed internal 450 MHz, TX, RX or TXRX
Fully integrated, fully sealed internal 900 MHz, TX, RX or TXRX
Channel spacing (450MHz) 12.5 or 25KHz spacing available
Dealer configurable, TX, TX/RX
End User Configurable Rx Only
Frequency approvals (900MHz) USA (-10), Australia (-20), New Zealand (-30)
450MHz Transmitter radio power output 0.5w / 2.0w (2.0w upgrade only available in select countries)
900MHz Transmitter radio power output 1.0w (30 dBm)
Receiver position update rate SPS750 MAX: 1, 2, 5 and 10 Hz positioning
Data Input and Output CMR+, RTCM 2.1, RTCM 2.3, RTCM 3.0
Outputs NMEA, GSOF and RT17 (RT17 Max)
Carrier Supports BINEX and smoothed carrier (Max)
Internal Data Logging Option Provides approx 2 MB of internal memory for static data measurements
450 MHz integrated radio capabilities
SPS750 MAX Base Station Receiver: Transmit / Receive
Rover Receiver: Transmit / Receive
900 MHz integrated radio capabilities
SPS750 MAX Base Station Receiver: Transmit / Receive
Rover Receiver: Transmit / Receive
SPS750 MAX Base and  Rover
Measured vector baseline length (Rover operational range from base station)
SPS750 MAX Unrestricted (limited to radio or cellular coverage only). Typically 1.8 – 3 miles (3-5 km) without repeater radio.
Rover operation within a VRS network using cellular phone dial up
SPS750 MAX Enabled