Trimble R6 Model 4 GPS GLONASS & Galileo 450-470 MHz Rover Receiver

Quick Overview

 Trimble R6 Model 4 GPS GLONASS COMPASS & Galileo 450 - 470 MHz Rover Receiver
- CMR Inputs
- CMR Outputs
- RTCM Inputs
- RTCM Outputs
- Data Collector
- Binary Outputs
- Data Logging
- Bluetooth
- L2CS
- Cellular
- L5
- Enable GLONASS
- Login Required
- Enable COMPASS
- Enable Galileo
- Software Version 4.90
- 450 - 470 MHz Radio Module P/N: 64235-66
- Serviced By A Trimble Authorized Service Center
SKU: GPS106
Item ID: X1718
Condition: Refurbished
Warranty: 90 Day Exchange

Included

* Trimble R6 Model 4 450 - 470 MHz Rover Receiver P/N: 9664-66 w/ Options... [ID- X1918]
         - CMR Inputs
         - CMR Outputs
         - RTCM Inputs
         - RTCM Outputs
         - Data Collector
         - Binary Outputs
         - Data Logging
         - Bluetooth
         - L2CS
         - Cellular
         - L5
         - Enable GLONASS
         - Login Required
         - Enable COMPASS
         - Enable Galileo
         - Software Version 4.90
         - 450 - 470 MHz Radio Module P/N: 64235-66
         - Serviced By A Trimble Authorized Service Center
* Li-Ion Battery Charger w/ AC Adapter
* Antenna
* DC Car Charger
* QTY. 2 Battery Packs
* RS232 PC Interface Cable
* User Manual on CD-ROM
* Hard Carrying Case (G)

Details

Trimble R6 Model 4 GNSS Receiver
The receiver incorporates a GNSS antenna, receiver, internal radio with a transmit option or an internal GSM module, and a battery in a rugged light-weight unit that is ideally suited as an all-onthe-pole RTK rover. Three LEDs allow you to monitor the satellite tracking, radio reception, data logging status, and power. Bluetooth wirelesstechnology provides cable-free communications between receiver and controller.

The Trimble R6 Model 4 GNSS receiver provides 220 channels for satellite tracking, and supports logging raw GNSS observables to the internal receiver memory or to a handheld controller for postprocessed applications.

Features:
  • Trimble R-track technology (Trimble R6 Model 4), which includes an advanced Trimble Maxwell 6 Custom Survey GNSS chip with 220 channels and allows the receiver to track the following:
    • GPS: L1 C/A, L1C, L2C, L2E, L5
    • GLONASS: L1 C/A, L1P, L2 C/A, L2P, L3 (optional)
    • Galileo: E1, E5A, E5B (optional)
    • BeiDou (COMPASS): B1, B2 (optional)
    • SBAS: QZSS, WAAS, EGNOS, GAGAN
  • Centimeter-accuracy, real-time positioning with RTK/OTF data, up to 10 Hz
  • Submeter-accuracy, real-time positioning using pseudorange corrections
  • Automatic OTF (on-the-fly) initialization while moving
  • Single Lithium-ion rechargeable battery
  • Cable-free Bluetooth communications with Trimble controllers
  • Two RS-232 serial ports for:
    • Trimble Format (CMR, CMR+™ and CMRx) input and output
    • RTCM SC-104 input and output (RTCM 2.1, 2.3, 3.0, 3.1)
    • 23 NMEA outputs
    • GSOF, RT17, and RT27 outputs
    • Supports BINEX and smoothed carrier
  • Internal memory for data storage

Specifications:
Physical specifications
Feature Specification
Size 19.0 cm (7.5") wide x 10.4 cm (4.1") deep including connectors
Weight: with internal battery, radio, and standard antenna 1.52 kg (3.35 lbs)
Operating times on internal 2.6 Ah battery (varies with temperature) 450 MHZ receive only - 5 hours 450 MHz receive/transmit: 2.5 hours (varies with wireless data rate) GSM: 4.7 hours
Power input 11–28 V DC with over-voltage protection on port 1 (7-pin lemo)
Operating temperature –40 °C to +65 °C (–40 °F to +149 °F)
Storage temperature –40 °C to +75 °C (–40 °F to +167 °F)
Humidity 100% condensing, unit fully sealed
Casing Water/dustproof IP67 dustproof, protected from temporary immersion to depth of 1 m (3.28 ft)
Positioning specifications
Positioning performance
Code differential GNSS positioning Horizontal: 0.25 m + 1ppm RMS
Vertical: 0.50 m + 1ppm RMS
SBAS differential positioning accuracy
Static GNSS surveying
High-precision static Horizontal: 3 mm + 0.1 ppm RMS
Vertical: 3.5 mm + 0.4 ppm RMS
Static and FastStatic Horizontal: 3 mm + 0.5 ppm RMS
Vertical: 5 mm + 0.5 ppm RMS
Kinematic surveying
Postprocessed Kinematic (PPK) GNSS surveying Horizontal: 8 mm + 1 ppm RMS
Vertical: 15 mm + 1 ppm RMS
Real-Time Kinematic Surveying Single Baseline < 30 km
Horizontal: 8 mm + 1 ppm RMS
Vertical: 15 mm + 1 ppm RMS
Network RTK Horizontal: 8 mm + 0.5 ppm RMS
Vertical: 15 mm + 0.5 ppm RMS
Initialization time typically < 8 seconds
Initialization reliability typically > 99.9%
Technical specifications
Tracking:
Trimble R6 Model 4 GNSS receiver Advanced Trimble Maxwell 6 Custom Survey GNSS chip with 220 channels. Satellites simultaneously tracked: GPS: L1 C/A, L1C, L2C, L2E, L5
GLONASS: L1 C/A, L1P, L2 C/A, L2P, L3 (optional)
Galileo: E1, E5A, E5B (optional)
BeiDou (COMPASS): B1, B2 (optional)
SBAS: QZSS, WAAS, EGNOS, GAGAN
Signal processing Advanced Trimble Maxwell 6 Custom Survey GNSS chip
Very low-noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth
Multipath suppression
Start-up Cold start: < 60 seconds from power on
Warm start: < 30 seconds with recent ephemeris
Initialization Automatic while moving or static
Initialization time Typically < 8 seconds
Initialization reliability Typically >99.9%
Communications Two RS-232 serial ports (Port 1, Port 2)
Baud Rates up to 115,200 bps
RTS/CTS flow control negotiation supported on port 2
Bluetooth communications through Trimble controller with Bluetooth support
Configuration Through user-definable application files or GPS Configurator
Output formats NMEA-0183: AVR; BPQ; DP; DTM; GBS; GGA; GGK; GLL; GNS; GRS; GSA; GST; GSV; HDT; LLQ; PJK; PJT; RMC, ROT; VGK; VHD; VTG; ZDA
GSOF (Trimble Binary Streamed Output)
RT17 and RT27 outputs, BINEX and smoothed carrier