Trimble 5800 / 5700 Zephyr GPS RTK Base & Rover w/ TSC2 430-450 MHz

Quick Overview

Trimble 5800 / 5700 GPS Survey Test System w/ Trimble 5700 GPS Receiver, Trimble 5800 GPS Receiver, Trimble Zephyr Geodetic Antenna, Sokkia PDL 430-450 MHz Positioning Data Link & Trimble TSC2 Data Collector

SKU: GPS97
Item ID: X1585 X1586 X1587 X1588 X1589
Condition: Refurbished
Warranty: 90 Day Exchange

Included

* Trimble 5700 GPS Receiver w/ Options... [ID- X1586]
         - CMR Inputs
         - CMR Outputs
         - RTCM Inputs
         - RTCM Outputs
         - Data Collector
         - Binary Outputs
         - Data Logging
         - Serviced By A Trimble Authorized Service Center
* Trimble 5800 GPS Receiver w/ Options... [ID- X1588]
         - CMR Inputs
         - CMR Outputs
         - RTCM Inputs
         - RTCM outputs
         - Data Collector
         - Binary Outputs
         - 10 Hz Measurements
         - Data Logging
         - Bluetooth
         - 430-450 MHz Radio Module P/N: 53620-44
         - Serviced By A Trimble Authorized Service Center
* Trimble TSC2 Survey Controller w/ Case [ID- X1587]
         - GNSS Surveying
         - TS Surveying
         - Advanced Geodetic Surveying
         - Trimble Survey Controller Version 12.50
* Sokkia PDL Positioning Data Link [ID- X1589]
         - 430-450 MHz Radio Module
* Trimble Zephyr Geodetic Antenna [ID- X1585]
* GPAC Battery
* Bracket For TSC2
* Antenna
* Trimble 32960 Cable DCA0541
* Trimble 41300-10 Cable DCA0228
* Antenna w/ Base & Extension
* RS66040557 Cable Power Cable
* QTY. 4 Battery Packs
* QTY. 2 AC Adapter/Chargers
* QTY. 2 Power Cords
* RS232 PC Interface Cable
* USB PC Interface Cable
* QTY. 2 Hard Carrying Cases (1 Generic Carrying Case)
 

Details

Trimble GPS 5700 GPS Receiver
The Trimble® 5700 GPS receiver is an advanced, but easy-to-use, surveying instrument that is rugged and versatile enough for any job. Combine your 5700 with the antenna and radio that best suit your needs, and then add the Trimble controller and software of your choice for a total surveying solution. The powerful 5700 GPS system will provide all the advanced technological power and unparalleled flexibility you need to increase your efficiency and productivity in any surveying environment.

The 5700 is a 24-channel dual-frequency RTK GPS receiver featuring the advanced Trimble MaxwellTM technology for superior tracking of GPS satellites, increased measuring speed, longer battery life through less power use, and optimal precision in tough environments. WAAS and EGNOS capability lets you perform real-time differential surveys to GIS grade without a base station. Use the receiver’s CompactFlash memory to store more than 8,900 hours of continuous L1/L2 data collection at an average of 15-second intervals. Transfer data to a PC at speeds of more than 1 megabit per second through the super-fast USB port.

Features:

  • Proven technology provides dependable performance and precision
  • Flexible configurations put you in total control
  • Rugged, high-performance hardware is built to last
  • Compatible with Trimble Integrated Surveying® technology


Specifications:

 

Code differential GPS positioning
Horizontal
±0.25 m + 1 ppm RMS
Vertical
±0.50 m + 1 ppm RMS
WAAS differential positioning accuracy
typically <5 m 3DRMS
Static and FastStatic GPS surveying
Horizontal
±5 mm + 0.5 ppm RMS
Vertical
±5 mm + 1 ppm RMS
Kinematic surveying
Horizontal
±10 mm + 1 ppm RMS
Vertical
±20 mm + 1 ppm RMS
Initialization time typically <10 seconds
Initialization reliability
typically >99.9%
Hardware
Casing
Tough, lightweight, fully sealed magnesium alloy
Dimensions (W×HxL)
13.5 cm × 8.5 cm x 24 cm
(5.3 in x 3.4 in x 9.5 in)
Weight
1.5 kg (3 lb) with internal batteries, internal radio,
internal battery charger, standard UHF antenna.
Less than 4 kg (8.8 lb) entire RTK rover including batteries
for 7 hours, range pole, controller and bracket
Temperature
Operating

–40 °C to +65 °C (–40 °F to +149 °F)
Storage
–40 °C to +80 °C (–40 °F to +176 °F)
Humidity
100%, condensing
Water/dustproof
IP67 dustproof, protected from temporary
immersion to depth of 1 m (3.28 ft)
Shock and vibration
Tested and meets the following
environmental standards
Shock
Non-operating: Designed to survive a 1 m (3.3 ft) drop onto concrete. Operating: to 40 G, 10 msec, sawtooth
Vibration MIL-STD-810F, FIG.514.5C-1

 



Trimble 5800 GPS Receiver
The Trimble 5800 is an ideal solution for the surveyor that needs a simple, straightforward GPS solution that performs under the most rigorous conditions. With flexible options for system configuration and upgradability, the Trimble 5800 is a smart long-term investment.

For simplified workflows, the new Trimble 5800 can be paired with a Trimble Recon for streamlined data collection. Combined with the Trimble TSC2 controller, the solution offers increased flexibility for all surveying needs, securing your investment as your business grows. The Trimble TSC2 also controls nearly all other Trimble sensors including the Trimble S6 Total Station and Trimble R8 GNSS Receiver. With Bluetooth wireless technology built in, cables are a thing of the past.

Features:

  • Scalable and upgradeable
  • Years of proven performance in the field
  • Cable-free for simple operation
  • Configurable as rover or base station
  • Flexible field control options


Specifications:

Size
19.0 cm (7.5") wide x 11.2 cm (4.4") deep including
connectors
Weight: with internal battery, radio, and standard antenna
1.34 kg (2.95 lbs)
Operating times on internal 2.4 Ah battery (varies with temperature)
450 MHZ receive only - 5.8 hours
450 MHz receive/transmit: 3.7 hours (varies with wireless data rate)
GSM: 4.1 hours
Power input
11–28 V DC with over-voltage protection on port 1 (7-pin lemo)
Operating temperature
–40 °C to +65 °C (–40 °F to +149 °F)
Storage temperature
–40 °C to +75 °C (–40 °F to +167 °F)
Humidity
100% condensing, unit fully sealed
Casing
Water/dustproof IP67 dustproof, protected from temporary
immersion to depth of 1 m (3.28 ft)
Code differential GPS positioning
Horizontal
±0.25 m + 1ppm RMS
Vertical
±0.50 m + 1ppm RMS
WAAS differential positioning accuracy
typically <5 m 3DRMS
Static and FastStatic GPS surveying
Horizontal
±5 mm + 0.5 ppm RMS
Vertical
±5 mm + 1 ppm RMS
Kinematic surveying
Horizontal
±10 mm + 1 ppm RMS
Vertical
±20 mm + 1 ppm RMS
Tracking:
72 Channels GPS L1 C/A Code, L1/L2 Full
Cycle Carrier
4 additional channels for SBAS WAAS/EGNOS support
Fully operational during P-code encryption
Signal processing
Advanced Trimble Maxwell™ Custom Survey GNSS chip
Very low-noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz
bandwidth
Multipath suppression
Start-up
Cold start: < 60 seconds from power on
Warm start: < 30 seconds with recent ephemeris
Initialization
Automatic while moving or static
Initialization time Typically: <20 seconds (Trimble R6 and R4/5800 Model 3 GPS receivers)
Initialization reliability
Typically >99.9%
Communications
Two RS-232 serial ports (Port 1, Port 2,)
Baud Rates up to 115,200 bps
RTS/CTS flow control negotiation supported on port 2
Bluetooth communications through Trimble controller with Bluetooth support

 

 

Trimble TSC2 Controller Data Collector
COMBINE FIELD AND OFFICE IN ONE POWERFUL HANDHELD COMPUTER
The Trimble® TSC2® Controller is an advanced handheld computer especially designed for Trimble optical and GPS surveying systems.
With the Microsoft® Windows Mobile™ 5.0 software operating system, the TSC2 controller runs your choice of powerful Trimble field software. Add specialized applications to the standard Microsoft Outlook Mobile, Excel Mobile, Word Mobile, Power Point Mobile and Internet Explorer programs, and the TSC2 controller becomes a powerhouse of field and office functions on one rugged business device.

SMART, EXPANDABLE HARDWARE
Every innovative feature on the TSC2 controller is designed to make your job easier. Clearly view background maps and check work on the vibrant color graphic display for greater data control and confidence. Use the full alphanumeric keyboard, or quickly select software options using the touch screen.The unique TSC2 controller changeable cap enables the use of removable memory or third-party media, such as GPRS, GPS, camera, and product scanner functions. Extend your data logging capabilities and experience a major leap in productivity.

INDUSTRY-LEADING COMMUNICATION TECHNOLOGIES
Eliminate cable hassles and expedite setup with integrated Bluetooth® wireless technology. When the TSC2 controller is used with a Trimble R8 or 5800 GPS system, the rover is 100% cable free for unsurpassed convenience and ease of use. The internal 2.4 GHz radio option is ideal for use with a robotic system such as the Trimble S6 total station.
Using the expandable media function, a GSM/GPRS modem can add full wireless communication to the Internet in the field.Transfer data in your office over a wireless 802.11 LAN—again, no cables are required. You can also use hotspots to quickly and securely share data with your office from remote locations.

FLEXIBLE COMMUNICATION OPTIONS
Choose the method of data transfer that suits your situation. Using an external modem such as a cell phone with Bluetooth, send and receive files over the Internet from the field: you don’t need to drive back to the office. In the office, internal 802.11 technology provides wireless connection to your network. The TSC2 controller also provides USB and serial RS232 communication options; data can be transferred to a PC or another TSC2 controller using a cable, Bluetooth, CompactFlash, or Secure Digital memory card media.

ONE CONTROLLER, ONE SOFTWARE, ONE INTERFACE
The TSC2 controller is central to Integrated Surveying™ from Trimble. With an application such as the Trimble Survey Controller™ software onboard, collect and manage both GPS and optical data in one Job file simply by switching the TSC2 controller between sensors. Standardize on one flexible controller for maximized investment. And your survey team only needs to know one interface. When field work is complete, simply transfer the Job file to your office using the communication method that suits your needs.


Features:

  • Advanced handheld field computer for exceptional versatility, efficiency, and freedom
  • Microsoft Windows Mobile operating system 5.0 software
  • Highest flexibility for optical and GPS surveying
  • Wireless operations in both the field and office


Specifications:

Physical
Size
266 mm × 131 mm × 48 mm (10.5 in × 5.2 in × 1.9 in);
 76 mm (3.0 in) at handgrip
Weight
0.95 kg (2.1 lb) including battery;
 1.09 kg (2.4 lb) including battery and
 optional internal radio
Memory
128 MB SDRAM, 512 MB internal non-volatile storage memory
Expandable Memory
CompactFlash (CF) card
 Secure Digital (SD) card
Processor
520 MHz Intel® PXA 270 XScale CPU
Wireless
Integrated Wireless LAN 802.11b
Power
Li-Ion rechargeable pack, 6600 mAh, battery life
 of 30 hours under normal operating conditions
 Fast charge to 80% in 2 hours; full charge in 4.5 hours.
 Battery charge status LED indicator
Software
The Trimble TSC2 controller runs the
 Trimble Survey Controller field software. In addition, a number of
 regional solutions are available. For more information on the field
 software that’s best for you, contact your local
 Trimble authorized distribution partner.
Environmental
Temperature
Operating Temperature

–30 °C to +60 °C (–22 °F to +140 °F)
Storage Temperature
–40 °C to +70 °C (–40 °F to +158 °F)
Humidity
100% condensing, MIL-STD-810F, Method 507.4
Sand & Dust
Protection against wind-driven according
 to MIL-STD-810F, and IP6X
Water
Waterproof IPX7
Drops
26 drops from 1.22 m (4.0 ft) onto hard surface
Vibration
MIL-STD-810F, Method 514.5, Procedure I, Fig. 17 & 18
Altitude
MIL-STD-810F, Method 500.4, Procedures I, II & III,
 4572 m (15,000 ft) at +23 °C (+73 °F)
Interface
Display
Color, illuminated TFT, daylight-readable touch screen
 displayed at 320 × 240 pixels
Keyboard
53 key alphanumeric keypad, 8-position spider key
Audio
Integrated speaker and microphone for audio system events, warnings and notifications.
Operating system
Microsoft Windows Mobile 5.0
Input/Output
Ports
RS232 9-pin serial port
 USB Client
 USB Host
 DC Power Port
Expansion
1 × Type I CompactFlash (CF) slot
 1 × Type II CompactFlash (CF) slot
 1 × Secure Data (SD) memory card slot

 

 

 

 

Trimble Zephyr Geodetic Antenna

The Trimble Zephyr Geodetic antenna is ideal for control work. The Zephyr Geodetic incorporates a large Trimble Stealth™ Ground Plane, which literally burns up multipath energy using technology similar to that used by Stealth aircraft to hide from radar. It is protected by weather-resistant materials and a low profile design, so when the antenna is used for a permanent installation, you can count on many years of continuous operation without the need for a radome.