Topcon GLS-1500 Laser Scanner
Topcon’s GLS-1500 laser scanner leaves nothing behind—except the competition. The operator-friendly design allows for quick and hassle-free setups which saves time and improves productivity. With batteries and data collector on-board, Topcon’s GLS-1500 is lightweight and cable-free. Transportation is a cinch. While other laser scanners take two people to unload, setup, operate, and load, the GLS-1500 is a one-man instrument. Small size, big performance This robust scanner sends out a laser beam that captures data at 30,000 points per second at a range of 500 ft. (150m) to a typical surface, and with an extended range to 1100 ft. (330m) for more reflective surfaces. Unique to Topcon’s GLS-1500 is the mechanical ability to select from multiple lens arrays to control the laser beam. This provides consistent 0.16 in. (4mm) accuracy throughout the range from 3 ft. to 500 ft. (1m to 150m). Feature packed... On-board Data Collection The GLS-1500 has an on-board data collector with an LCD display and a 21-key keyboard. This gives the scanner the freedom to function as a stand-alone laser scanner with no connection to a computer Eye-safe and Efficient Use the GLS-1500 anywhere without worrying about damaging the eyes of a passersby. The GLS-1500 uses an invisible, Class 1, eye-safe laser. Scan near airports, busy traffic, and populated areas with no effect to the people or the environment. In addition, the use of a Class 1 invisible laser offers the benefit of low power consumption. With lower power consumption, the GLS-1500 can operate at longer times with fewer battery changes. Built-in 2.0 Megapixel Digital Camera Reduce the amount of equipment needed in the field with the GLS-1500’s built-in 2.0 megapixel digital camera. Collect sharp and detailed images from the scanning location, or connect to a PC with ScanMaster software, and stream a live video feed of the jobsite to aid in scan setup and data acquisition
Topcon GLS-1500 features:
- Compact all in 1 design
- Precise Scan Technology
- On-board lithium ion batteries
- Hot swappable batteries
- Wireless Lan & USB connectivity
- Dual axis compensators
- 30,000 points/second scan rate
- 330m maximum range at 90% reflectivity
- 150m maximum range at 18% reflectivity
- 4mm @ 150m single point accuracy
- 6” horizontal and vertical angular accuracy
- SD card data storage
- Horizontal and vertical jogs
Advanced technology in an operator-friendly design: Precise Scan Technology The GLS-1500 integrates pulse-based time of flight and phase-based technologies to achieve industry-leading accuracy and “clean” scan data. The GLS-1500 inherently has:
- Less point cloud noise
- The most consistent scanning accuracy
- The ability to detail slight texture variations
- Great results at ranges over 330 ft. (100m)
Wireless LAN & USB Connectivity The GLS-1500 offers wireless LAN (802.11b) and USB 2.0 PC connection. With the GLS-1500’s built-in wireless LAN communication, you can control and collect image and scanning data on a PC from your car. Dual Axis Compensators The use of dual axis compensators allows for more accurate instrument setups and scans. Occupy a known coordinate and backsight so traversing within one coordinate system is possible. Compensators can be turned off for tiltable mounts. On-board Lithium-ion Batteries The GLS-1500 uses four hot-swappable batteries, two per side. With the lower power consumption of the Class 1 laser, the GLS-1500 can operate for 4 hours doing a continuous scan on one set of batteries at a temperature of 68°F (20°C).
Topcon GLS-1500 Laser Scanner Specifications
SPECIFICATIONS |
SYSTEM PERFORMANCE |
Maximum Range at specified reflectivity |
1100 ft. (330m) at 90%, 500 ft. (150m) at 18% |
Calculated Range at 18% |
500 ft. (150m) |
Minimum Range |
3.28 ft. (1m) |
Single Point Accuracy |
Distance: 0.16 in. at 500 ft. (4mm at 150m) |
Dual Axis Compensators |
Angle (vertical): 6” Accuracy, Angle (horizontal): 6” Accuracy |
LASER SCANNING SYSTEM |
Type |
Pulsed |
Color |
Invisible (eye-safe laser) |
Laser Class |
Class 1 |
Scan Rate |
30,000 points/second |
Scan Density (Resolution) |
Spot Size: 0.24 in. at 130 ft. (6mm at 40m), Maximum Sample Density: 0.04 in. at 328 ft. (1mm at 100m) |
Field-of-view (Per scan) |
Horizontal: 360° (maximum), Vertical: 70° (maximum) |
Color Digital Imaging |
2.0 megapixels digital camera |
ELECTRICAL |
Power Supply |
On-board Lithium-ion battery BT-65Q x4 |
Power Consumption |
<25W |
Maximum Operation Time |
Approx. 4.0 hours per 4 pcs |
Hot-swappable Battery |
Hot-swap (2 by 2) |
ENVIRONMENTAL |
Operating Temperature |
+32°F to +104°F (0°C to +40°C) |
Storage Temperature |
+14°F to +140°F (-10°C to +60°C) |
Dust/Humidity |
IEC Specification IP52 |
PHYSICAL |
Dimensions |
9.5 in. x 9.5 in. x 22.3 in. (240mm x 240mm x 566mm) |
Weight |
35 lbs. (16kg) w/o on-board battery and tribrach |
|