Leica DNA03 0.3mm High Precision Digital Level

Leica DNA03 0.3mm High Precision Digital Level

Leica digital levels DNA10 and DNA03 cover the entire range of applications from the construction site to the 1st order levelling tasks. The practice oriented solutions in the integrated measurement programs, the large liquid crystal display and the alphanumeric keyboard help to keep track of your work, make it faster and more productive.

Land surveys and line levelling

Thanks to the extensively automated processes, the observer has been relieved of much of the work at the keyboard. Adjustable tolerance checks for the measured data add safety to the measurements taken.

Area levelling

All components required for an appropriate levelling are at your disposal. The program “Measure Only” is suited for elementary staff reading and distance measurements or to survey masses of points. In addition the Quick Code function provides for measurement and point coding in a single measuring process.

Levelling at construction sites

Height determination and stake out: Thanks to the easyto-use measuring program “Measure & Record” the experienced construction site operator can quickly and reliably measure height differences, perform line levelling or stake outs. Measure profile points or many intermediate points and the display “Point to Point” continuously provides the height difference between each measured point.

More practical advantages

Earth curvature correction: if this is activated in a Leica DNA digital level, then the measurements made are automatically free of the influence of the earth’s curvature.

Correction of collimation error

Can be reliably determined and saved using the four integrated Check and Adjust procedures it can be entered manually.

Measurement modes: Leica DNA digital levels can make: single measurements, average or median out of multiple measurements, a default standard deviation, repeated single measurements.

Reduced field of view: For a fine measurement a field of view of about 1.1° is required. This corresponds to 38cm per 20m of target distance.

Data output format: For printouts like those used in field books. Up to four user formats can be stored in the instrument.

The DNA10 and DNA03 models are suited for mobile or stationary measurement configuration, where an external field computer collects and processes the data. External commands configure the instrument and trigger measurements.