Included
* Trimble MS750 Dual Frequency RTK Base Station Receiver [ID- X1729]
- Serviced By A Trimble Authorized Service Center
* Trimble 58957-10 Cable
- Serviced By A Trimble Authorized Service Center
* Trimble 58957-10 Cable
Details
Trimble MS750 Dual Frequency RTK
Receiver The MS750 represents the highest level of accuracy and response available from a dual frequency GPS receiver. The receiver is specifically designed to allow the easy integration of reliable centimeter-level positions to any guidance or control application. Accuracy and Response Times Dynamic platforms, require virtually instantaneous position reports multiple times per second. The MS750 delivers positions to guidance or control loop software twenty times per second with a latency of less than 20 milliseconds. This responsiveness is matched with a horizontal accuracy of two centimeters and vertical accuracy of three centimeters. For the most precise applications, the MS750 provides one centimeter accuracy horizontally at a 5 Hz rate with a small increase in latency. Interfacing and Configuration Ease The MS750 is designed to plug right into your application with minimal development. An easy touse application file interface enables the user to completely program receiver operation with a single command. Alternately, the receiver can be configured via the user-friendly built-in display and keyboard interface, or by the included Windows-based Configuration Toolbox software. Multiple configurations can be stored in the receiver as files and activated when desired. Local datum and transformation parameters may be loaded directly into the receiver. Therefore, output grid coordinates are compatible with GPS and traditional survey systems that may be in use on the same site. ASCII or Binary messages may be output through any of the three bi-directional serial ports. The receiver also includes support for the industry standard CAN (Controller Area Network) interface. Advanced Technology The accuracies, update rates and latencies available in the MS750 are made possible through a GPS architecture specifically designed for demanding dynamic positioning applications. Reliable operation in the most adverse environments, such as radio interference experienced at construction or mining sites, is a strict requirement. Custom designed hardware with Supertrakô multibit GPS signal technology and Everestô advanced multipath suppression provide superior tracking especially for weaker, low elevation satellites. Both the RTCM format for differential GPS corrections and Trimble's published Compact Measurement Record (CMR) differential data can be received simultaneously, allowing the receiver to choose the optimum source and provide seamless navigation. Available as an option is the ability to calculate the baseline vector between two moving receivers to centimeter accuracy. The MS750 addresses a vast range of applications in the field of machine positioning, guidance and control. Features:
Spcifications:
|