Included
* Topcon GX-60 Control Box [ID- X1860]
- 3DMC Version 11.1
- Serviced By A Topcon Authorized Service Center
* Topcon MC-R3 GPS Receiver [ID- X1861]
Main Board Options:
- GPS
- GLONASS
- L1
- L2
- Cinderella
- CDDB
- CDDR
- RTKB
- COOP
- EVNT
- AJM
- MPR
- RAIM
- DTM
- MAGN
- GEO
- WAAS
- CDIF
- CMRO
- CMRI
- CPH
- ETHR
- USB
- OCTO
- JPSO
- RM3I
- L2C
- DYNA
- DANT
Auxilliary Board Options:
- GPS
- GLONASS
- L1
- L2
- Cinderella
- CDDB
- CDDR
- RTKB
- COOP
- EVNT
- AJM
- MPR
- RAIM
- DTM
- MAGN
- GEO
- WAAS
- CDIF
- CMRO
- CMRI
- CPH
- ETHR
- USB
- OCTO
- JPSO
- RM3I
- NBM
- L2C
- DANT
- GNSS Firmware Version 4.1DS
- Topcon Digital 2 Radio: 440-50000 Mhz
- Serviced By A Topcon Authorized Service Center
* QTY. 2 Topcon G3-A1M GPS Antenna's [ID- X1858 X1859]
- Serviced By A Topcon Authorized Service Center
* User Manual On Cd-ROM
* Hard Carrying Case
- 3DMC Version 11.1
- Serviced By A Topcon Authorized Service Center
* Topcon MC-R3 GPS Receiver [ID- X1861]
Main Board Options:
- GPS
- GLONASS
- L1
- L2
- Cinderella
- CDDB
- CDDR
- RTKB
- COOP
- EVNT
- AJM
- MPR
- RAIM
- DTM
- MAGN
- GEO
- WAAS
- CDIF
- CMRO
- CMRI
- CPH
- ETHR
- USB
- OCTO
- JPSO
- RM3I
- L2C
- DYNA
- DANT
Auxilliary Board Options:
- GPS
- GLONASS
- L1
- L2
- Cinderella
- CDDB
- CDDR
- RTKB
- COOP
- EVNT
- AJM
- MPR
- RAIM
- DTM
- MAGN
- GEO
- WAAS
- CDIF
- CMRO
- CMRI
- CPH
- ETHR
- USB
- OCTO
- JPSO
- RM3I
- NBM
- L2C
- DANT
- GNSS Firmware Version 4.1DS
- Topcon Digital 2 Radio: 440-50000 Mhz
- Serviced By A Topcon Authorized Service Center
* QTY. 2 Topcon G3-A1M GPS Antenna's [ID- X1858 X1859]
- Serviced By A Topcon Authorized Service Center
* User Manual On Cd-ROM
* Hard Carrying Case
Details
Shatter the Final 3D Automation Production Barrier – Speed Traditional finish grading with a dozer took multiple passes at slower speeds. Existing 3D-GPS machine control allowed operators to double their production. 3D-MC2 uses revolutionary technology to reach an unbelievable new level of performance: four times faster than a standard dozer, two times faster than any 3D dozer! One dozer doing the work of two 3D dozers; think of the money you will save. More Efficient Use of your Machine 3D-MC2 will drastically change the role your dozer plays on a typical job site, in some cases it may even replace the need for a motor grader. It also means more efficient use of your dozer. Not only does speed increase, but fewer passes are needed, so more work can be done in less time. That means less machine operating time translating into less fuel, less wear on a machine and most importantly, more time that can be spent working in other areas or jobsites. Improved Operator Performance 3D-MC2 is built on our same easy to use interface so your operators will have no problem putting it to work right away. As a matter of fact, with the advancements of 3D-MC2 your less experienced operators will be able to compete with even your most skilled operators. More for less, what could be better! How it Works 3D-MC2 utilizes our Topcon’s GX-60 control box, GPS+ antenna, MC-R3 receiver and MC2 sensor and pairs them with advanced controlling software to provide position updates up to 100 times per second. The MC2 sensor combines a gyro, compass and inertial sensor to measure the X, Y and Z position as well as the roll, pitch, yaw and acceleration of the dozer. 3D-MC2 provides the most stable and responsive control system possible The Topcon 3D-MC2 Advantage Fine grading with a dozer has been typically done in first gear. Not anymore. Now you can move more material at higher speeds and at a tighter accuracy with one machine. That’s the Topcon advantage. Features:
Specifications:
Topcon G3-A1M Multiple GNSS Constellation Antenna The G3-A1 is a multiple constellation antenna, and based on the corresponding receiver can receive GPS and GLONASS satellite signals. The G3-A1 is intended for high vibration uses, such as on the top of a machine control mast. The antennas have been tested to extreme vibration specifications and are recommended for the most rugged environments. Why risk placing an expensive electronic receiver at the top of a machine mast. This ruggedized antenna can be used with bulldozers, motor graders, scrapers, milling machines, and other systems. An optional ground plane can be easily attached to supplement the reduction of multipath signal interference. Features:
Specifications:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
