Trimble SNR910 900 MHz On Machine Radio
- 902-928MHz Internal Radio
- This Unit Was Serviced By A Trimble Authorized Service Center
Trimble SNR910 On Machine Radio
Rugged, 900MHz SNR910 On-Machine Radio for Grade Control Systems
The Trimble® SNR910 is a multi-network, 900MHz on machine radio designed specifically for use on grade control system applications for the construction and mining industries. The SNR900 on machine radio has been designed for use within a Trimble Grade Control System. It offers outstanding features and benefits for on-machine applications:
- Increased robust power handling allows direct connection to machine power for easier installation and cabling
- Controller Area Network (CAN) communication provides a simpler, more reliable system
- Error correction and a high-speed data rate ensures maximum performance
- Designed for reliable operation in demanding RF environments and optimized for with increased sensitivity and jamming immunity
The SNR900 on machine radio can be used as a replacement radio on Trimble SiteVision® systems. This rugged unit is fully sealed against dust, rain, splash, and spray for optimal reliability in all weather conditions to minimize downtime and lower overall operating costs.
SNR910 Specifications
|
| Standard Features |
• Easily ported between machines, uses common mount bracketry and interface cable
• Rugged, 100% fully sealed, waterproof cast aluminum housing, with no internal moving parts and sealed radio port connector and antenna, designed to be mounted externally on the machine
• Capable of being used on 12 V and 24 V machines, input voltage range of 9 to 32 V, reverse polarity protection and load dump protection
• Robust power handling allows direct connection to machine power for easier installation and cabling
• Backwards compatible with customer’s existing Trimble GCS900, SiteVision® , and BladePro® 3D systems
• Radio capable of providing two-way wireless data transfer and remote machine diagnostics |
SNR910 900MHz Product Specifications Compatibility:
|
GCS900 v10+ |
| GCS900 v6.xx |
| SiteVision GPS Yes (900 MHz only, GPS-only) |
| BladePro 3D Yes (900 MHz only, GPS-only) |
| Two-way data capable |
| 2WD & UTS simultaneously |
| Use with Trimble SPSx30 UTS |
| Physical Characteristics |
| Height |
220 mm (8.7 in.) |
| Height with radio antennas |
400 mm (15.7 in.) |
| Width |
215 mm (8.5 in.) |
| Depth |
85 mm (3.3 in.) |
| Mounting:: |
7 mm holes, 86 x 186.79 mm rectangular pattern, mounted with 6 mm fasteners |
| Connector: |
Machine Mount: SNR Adaptor bracket to standard Trimble 3D grade control system on-machine radio mount bracket. 8 pin bulkhead, sealed |
| Environmental Characteristics |
| Temperature: |
Operating: -40 °C to +70 °C (-40 °F to +158 °F) |
| Storage: -40 °C to +85 °C (-40 °F to +185 °F) |
| Electrical Specifications |
| Input Voltage: |
9 to 32 VDC |
| Current: |
Nominal 500 mA |
| Reverse Polarity Protection: |
YES |
| Load Dump Protected: |
YES |
| GPS RF Performance |
| Transmit Power: |
28.5 dBm, .7 W (Two-way data mode) |
| Receive Sensitivity |
-103 dBm |
| Frequencies |
902–928 MHz USA,Canada, Australia, NZ |
| Over the Air Data Rate |
128 kbps |
| Range |
3-5 km (1.8 – 3.1 m) typical |
|
