hit counter

Trimble SPS985L GPS GLONASS 900 MHz Base & Rover Set

Quick Overview

Trimble SPS985L GPS GLONASS Base & Rover Antenna Set w/ Options...

Please note that data collectors with SCS900 Software lower than Version 3.2 will not connect to the SPS985L!
SKU: GPS158
Item ID: X2631 X2632
Condition: Refurbished
Warranty: 90 Day Exchange
$16,995.00
OR

Included

* Trimble SPS985L GPS GLONASS Base Or Rover Smart Antenna P/N: 93985-96 w/ Options... [ID- X2631]
         - CMR Outputs
         - RTCM Outputs
         - Data Collector
         - Bluetooth
         - L2CS
         - UHF Transmit
         - Disable NMEA
         - NMEA
         - LBand
         - Enable GLONASS
         - Enable Webserver
         - Login Required
         - Firmware Option
         - 900 MHz Internal Radio
         - Data Collectors with SCS900 Software lower than Version 3.2 will not connect to the receiver
         - Serviced By A Trimble Authorized Service Center
* Trimble SPS985L GPS GLONASS Rover Smart Antenna P/N: 93985-96 w/ Options... [ID- X2632]
         - CMR Inputs
         - RTCM Inputs
         - Data Collector
         - Bluetooth
         - L2CS
         - Disable NMEA
         - LBand
         - Enable GLONASS
         - Enable Webserver
         - No Static CMR Output
         - Login Required
         - Firmware Option
         - 900 MHz Internal Radio
         - Data Collectors with SCS900 Software lower than Version 3.2 will not connect to the receiver
         - Serviced By A Trimble Authorized Service Center
* Trimble 80751 Power Cable
* QTY. 2 Antennas
* QTY. 2 Trimble Extension Rods
* Li-ION Battery Charger w/ AC Adapter
* QTY. 2 Battery Packs
* User Manual On Cd-ROM
* Carrying Case (G)

Details

Trimble SPS985L GNSS Smart Antenna [ID- X2631]  

Trimble SPS985L GNSS Smart Antenna [ID- X2632]

- CMR Outputs
- RTCM Outputs
- Data Collector
- Bluetooth
- L2CS
- UHF Transmit
- Disable NMEA
- NMEA
- LBand
- Enable GLONASS
- Enable WebServer
- Login Required
- Firmware Option
- 900 MHz Internal Radio
- Serviced By A Trimble Authorized Service Center
- CMR Inputs
- RTCM Inputs
- Data Collector
- Bluetooth
- L2CS
- Disable NMEA
- LBand
- Enable GLONASS
- Enable Webserver
- No Static CMR Output
- Login Required
- Firmware Option
- 900 MHz Internal Radio
- Serviced By A Trimble Authorized Service Center

Trimble SPS985L Smart Antenna
The ultra-rugged Trimble® SPS985L GNSS Smart Antenna offers unmatched reliability for construction site positioning. Ideal for use on small and large job sites, the SPS985L can serve as a precise GNSS rover system or as a base station for other GNSS operations including machine control.

The SPS985L provides the highest GNSS precision specifications available, using GPS, GLONASS, and QZSS constellations.

Easy-to-Use Rover
The SPS985L is engineered to stand up to the most dynamic and rugged jobsite measurement applications. The integrated smart antenna design and quick release connector make it easy to transport and set up on a range pole, ATV or supervisor truck.

The SPS985L can move from one site measurement application to another, saving set up time and maximizing use time. For example, a grade checker can mount the SPS985L to an all terrain vehicle and conduct site topos, check as-builts, and road center lines in even the roughest site conditions. The SPS985L can withstand the high vibration scenarios often seen on ATVmounted site work without interruption or fear of damage.

The SPS985L integrates numerous timesaving features in a compact and rugged system. It has never been so quick and easy to get measuring. Initial site work and topo can even be done base station free using satellite delivered GNSS corrections to the rover.

TRIMBLE SCS900 SITE CONTROLLER SOFTWARE
With Trimble SCS900 Site Controller Software and the SPS985L, you can:

  • Determine cut/fill on a range pole, utility vehicle, or truck
  • Stake out site or road features, utilities, daylight lines and side slopes
  • Measure progress and calculate material stockpile volumes
  • Carry out as–built measurements, grade checks and laid material thickness checks

RELIABLE BASE STATION
The SPS985L can also serve as a powerful site base station, using integrated Wi-Fi or optional radio to send and receive corrections for rover or machine control work. It is the easiest base station on the market – just put it on the tripod, switch it on, and you’re ready to go. The SPS985L will automatically establish a Wi-Fi connection with the machine radio or GNSS rover and begin transmitting corrections.

TRIMBLE WEB UI
The Trimble Web UI™ eliminates the need to travel to the job site for routine monitoring of the established base station. Now you can assess the health and status of the base station and perform remote configurations from the office. Setting a new standard for rugged reliability, the SPS985L GNSS Smart Antenna keeps your crews working, not wasting time with GNSS maintenance.

Specifications:

Power supply
AC Input Voltage 100 to 240 V AC+/-10 %
AC Frequency 50 to 60 Hz
DC Output Voltage 19 V
DC Output current Approximately 3.5 A
Charger DC Power Input Voltage
Operation 10 V to 21 V Unit switch off if voltage is out of range
DC Power Input Voltage limits 8 V to 32 V
Absolute maximum input 32 V
Voltage
Over voltage 21 V to 32 V
Under voltage < 10 V
Working voltage 10 V to 21 V
Charging
Sum of charge time for all batteries 5 to 6 hours to charge two batteries
Charger in 1st hour > 60 %