Trimble SPS985 GPS GLONASS Base Or Rover Antenna

Quick Overview

Trimble SPS985 GPS GLONASS Base Or Rover Antenna w/ Options...
- CMR Inputs
- CMR Outputs
- RTCM Inputs
- RTCM Outputs
- Data Collector
- Bluetooth
- L2CS
- UHF Transmit
- LBand
- Enable GLONASS
- Enable Webserver
- Login Required
- Unit Does Not Have A Radio Module Installed
- Serviced By A Trimble Authorized Service Center
SKU: GPS79
Item ID: X1324
Condition: Refurbished
Warranty: 90 Day Exchange

Included

* Trimble SPS985 GPS GLONASS Base Rover P/N: 82500-00 w/ Options... [ID- X1324]
         - CMR Inputs
         - CMR Outputs
         - RTCM Inputs
         - RTCM Outputs
         - Data Collector
         - Bluetooth
         - L2CS
         - UHF Transmit
         - LBand
         - Enable GLONASS
         - Enable Webserver
         - Login Required
         - Unit Does Not Have A Radio Module Installed
         - Serviced By A Trimble Authorized Service Center
* Li-Ion Battery Charger w/ AC Adapter
* Trimble USB TO LEMO Cable P/N: 80751
* Antenna
* QTY. 2 Battery Packs
* User Manual On CD-ROM
* Hard Carrying Case

Details

Trimble SPS985 Smart Antenna

Rugged, Reliable Positioning
The ultra-rugged Trimble® SPS985 GNSS Smart Antenna offers unmatched reliability for construction site positioning. Ideal for use on small and large job sites, the SPS985 can serve as a GNSS rover system or as a Wi-Fi enabled base station for other GNSS operations including machine control.

Easy-to-Use Rover
The SPS985 is engineered to stand up to the most dynamic and rugged jobsite measurement applications. The integrated smart antenna design and quick release connector make it easy to transport and set up on a range pole, ATV or supervisor truck.

The SPS985 can move from one site measurement application to another with one quick release, saving set up time and maximizing use time. For example, a grade checker can mount the SPS985 to an all terrain vehicle and conduct site topos, check as-builts, and road center lines in even the roughest site conditions. The SPS985 can withstand the high vibration scenarios often seen on ATV-mounted site work without interruption or fear of damage.

With Trimble SCS900 Site Controller Software, you can:
  • Determine cut/fill on a range pole, utility vehicle, or truck
  • Stake out site or road features, utilities, daylight lines and side slopes
  • Measure progress and calculate material stockpile volumes
  • Carry out as–built measurements, grade checks and laid material thickness checks
The SPS985 integrates numerous timesaving features in a compact and rugged system. It has never been so quick and easy to get measuring. Initial site work and topo can even be done base station free using satellite delivered GNSS corrections to the rover.

The Trimble Web UI™ eliminates the need to travel to the job site for routine monitoring of the established base station. Now you can assess the health and status of the base station and perform remote configurations from the office. Setting a new standard for rugged reliability, the SPS985 GNSS Smart Antenna keeps your crews working, not wasting time with GNSS maintenance.

Reliable Base Station
The SPS985 can also serve as a powerful site base station, using integrated Wi-Fi or optional radio to send and receive corrections for rover or machine control work. It is the easiest base station on the market – just put it on the tripod, switch it on, and you’re ready to go. The SPS985 will automatically establish a Wi-Fi connection with the machine radio or GNSS rover and begin transmitting corrections.

With integrated Trimble 360™ receiver technology, the SPS985 GNSS Smart Antenna can "see" more GNSS constellations and signals than traditional GPS, so you can expect greater accuracy in more challenging conditions such as under tree canopy and in urban areas. That also means more uptime using the system and more productivity for your job crews.

Specifications:
General
Keyboard and display LED indicators for satellite tracking radio link reception and power monitoring On/Off key for one-button startup
Dimensions (W x D) 12 cm (4.7 in) × 13 cm (5.1 in)
Weight 1.55 kg (3.42 lb) including radio and battery
Complete system (rover, controller, pole) 3.9 kg (8.6 lb)
Environmental
Operating –40 °C to +65 °C (–40 °F to +149 °F)
Storage –40 °C to +75 °C (–40 °F to +167 °F)
Humidity 100%, condensing
Waterproof IP67 for submersion to depth of 1 m (3.3 ft), dustproof
Pole drop Designed to survive a 2 m (6.6 ft) pole drop onto concrete
Measurements
440-channel L1C/A, L1/L2/L2C GPS and QZSS. Upgradable to L5 and GLONASS L1/L2C/A, L1/L2P Full Cycle Carrier
Galileo
BeiDou
OmniSTAR
Trimble EVEREST™ multipath signal rejection
4-channel SBAS (WAAS/EGNOS/MSAS/QZSS)
Code Differential GPS Positioning
Horizontal accuracy 0.25 m + 1 ppm RMS (0.8 ft + 1 ppm RMS)
Vertical accuracy 0.50 m + 1 ppm RMS (1.6 ft + 1 ppm RMS)
Real-Time Kinematic (RTK) Positioning
Horizontal accuracy 8 mm + 1 ppm RMS (0.026 ft + 1 ppm RMS)
Vertical accuracy
15 mm + 1 ppm RMS (0.05 ft + 1 ppm RMS)
Trimble xFill
Horizontal accuracy RTK + 10mm/minute RMS
Vertical accuracy RTK + 20mm/minute RMS
Initialization Time
Initialization reliability (May be affected by atmospheric conditions, signal multipath, and satellite geometry.
Initialization reliability is continuously monitored to ensure highest quality.)
>99.9%
Power
Internal Rechargeable, removable 7.4 V, 2.6 Ah Lithium-ion battery in internal battery compartment
External
External power input with over-voltage protection 11 V DC to 28 V DC external power input
Power consumption 3.7 W, in RTK mode with internal radio
Operation Time on Internal Battery
Rover 4.6 hours; varies with temperature
Base station with internal radio 3.5 hours; varies with temperature
Regulatory Approvals
  • FCC Part 15 Subpart B (Class B Device), Part 15.247, Part 90
  • Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
  • Canadian RSS-310, RSS-210, and RSS-119
  • Cet appareil est conforme à la norme CNR-310, CNR-210, et CNR-119 du Canada
  • CE mark compliant
  • C-tick mark compliant
  • RoHS compliant
  • WEEE compliant
Communications
Lemo (Serial) 7-pin Lemo 2-key, Power Input, USB
Bluetooth wireless technology Fully-integrated, fully-sealed 2.4 GHz
Bluetooth module
Integrated radios (optional) Fully-integrated, fully-sealed
Internal 450 MHz (UHF) Tx/Rx;
Internal 900 MHz Tx/Rx
Internal radio output
450 MHz output power
900 MHz output power

0.5 W, upgradeable to 2 W
1.0 W
External GSM/GPRS, cell phone support Supported via SCS900 and SPS controller
Receiver position update rate 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz positioning
Correction data input/output CMR™, CMR+™, CMRx, RTCM3, RTCM 2.x (with Rover/Base upgrade)
Data outputs NMEA, GSOF