More Views

Topcon GR-3 GPS GLONASS L1 L2 RTK Base Or Rover 915 US GSM Receiver

Quick Overview

Topcon GR-3 GPS GLONASS Base Or Rover Receiver w/ Options...
- GPS
- GLONASS
- L1
- L2  
- RTK Base
- Cinderella
- Co-Op Tracking
- Multipath Reduction
- Ethernet Port
- USB Port
- FTP Connection
- RAIM
- Datums Support
- Magnetic Azimuth
- Geoid Height
- RTCM3 Input
- CMR Output
- CMR Input
- TPS Output
- N-Beam
- 915 US GSM Radio
- Serviced By A Topcon Authorized Service Center
SKU: GPS60
Item ID: X1373
Condition: Refurbished
Warranty: 90 Day Exchange

Included

* Topcon GR-3 GPS GLONASS Receiver w/ Options... [ID- X1373]
         - GPS
         - GLONASS
         - L1
         - L2 
         - RTK Base
         - Cinderella
         - Co-Op Tracking
         - Multipath Reduction
         - Ethernet Port
         - USB Port
         - FTP Connection
         - RAIM
         - Datums Support
         - Magnetic Azimuth
         - Geoid Height
         - RTCM3 Input
         - CMR Output
         - CMR Input
         - TPS Output
         - N-Beam
         - 915 US GSM Radio
         - Serviced By A Topcon Authorized Service Center
* Topcon Serial Transfer Cable
* Topcon Adapter Cable P/N: 14-008016-03
* Antenna
* QTY. 2 Battery Packs
* AC Adapter/Charger
* User Manual On CD-ROM
* Hard Carrying Case (G)

Details

Topcon GR-3 G3 GNSS Receiver
Topcon’s GR-3 receiver, the next generation of system design and tracking technology, is now available with a completely new digital UHF radio system utilizing DSP technology. This technological advancement delivers far greater reliability and performance than older analog UHF technology of the past and sets new standards for performance, accuracy and innovative design.

GPS receiver design has taken a quantum leap forward with the new GR-3. It starts with 72 “universal” channels that support all current and planned satellite positioning signals. Then there’s the micro-tuned, precision antenna capable of receiving all G3 positioning signals with Topcon’s patented center-mount radio antenna for superior signal tracking and interference reduction.

The GR-3 receiver incorporates a unique dual communication system, featuring both cellular and radio technology. Offering a 915 MgHz Spread Spectrum internal Tx/Rx* or Digital UHF radio, the GR-3 can serve roles as either an RTK base or rover system.
*915 MgHz Spread Specturm radio technology is not approved for use in Europe or Asia

Features:
  • Digital UHF or Spread Spectrum radio
  • Advanced Rugged System Design
  • 72 Universal Tracking Channels
  • RTK 10Hz position and raw observation
  • Bluetooth Wireless Technology
  • G3 Satellite Tracking (GPS, Glonass, Galileo)

Specifications:
Tracking
Signal
GPS/GLONASS L1/L2/L5 C/A and P Code & Carrier, Gallileo E 1/2/5a and L1, WAAS/EGNOS
Channel
72
Cold Tracking
<30 seconds
Warm Tracking
<5 seconds
Reacquisition
<1 seconds
Accuracy
Static
3mm +.5ppm horizontal, 5mm + .5ppm vertical
RTK/Kinematic
10mm + 1 ppm horizontal, 15mm + 1 ppm vertical
DGPS
> .25m Post Processing, < .50m Real time
Physical
Enclosure
Magnesium I-beam Housing, Waterproof construction
Dimensions
W: 158 x D: 158 x H: 234.5 mm
Weight
1.78 kg
Color
Topcon Grey/Yellow
Environmental
Operating Temperature
-20 to +50 degrees Celsius
Storage Temperature
-20 to +35 with batteries, -40 to +75 without batteries degrees Celsius
Waterproof
IP66
Drop
2 m
Power
Internal Battery
2 Li-Ion, 3900mAh, 7.2V
Operating Time
14 Hours
External Power
1 port(s)
Battery Charger
Dual Li-Ion "Smart" charger with optional Alkaline battery pack. Charger doubles as external power source
Communication
Bluetooth
Bluetooth standard 1.2
USB
1.1 Version
Key and LED
Key
Two keys, Power ON/Off and Function Start/stop data logging, switch to extended information mode
LED
6, one for receiver status, data recording indication, TX/Rx, Bluetooth status and 2 for indication of each battery charge level
Memory
Internal Memory
Environmentally protected, removable SD™ media card slot
Capacity
1024 MB
Connectors
External Power Port
1 port(s), DC Jack Type A ODU
External Antenna Connector
reverse tnc/bnc modem connector
SD Card Slot
1 slot, Memory I/O
Serial Port
1 port(s), RS232 ODU