More Views

Leica GS18 T GNSS Antenna Surveying RTK Rover Receiver

Quick Overview

Leica GS18 T GNSS Antenna Rover Receiver
SKU: GPS172
Item ID: GPS172-L/T*
Condition: Refurbished
Warranty: 90 Day Exchange

Included

* Leica GS18 T GNSS Antenna Rover Receiver [ID- -L/T*]
* Battery Pack
* Carrying Case

Details

Leica GS18 T Smart Antenna

 

Engaging software

The Leica GS18 T is accompanied with the revolutionary Captivate software, turning complex data into the most realistic and workable 3D models. With easy-to-use apps and familiar touch technology, all forms of measured and design data can be viewed in all dimensions. Leica Captivate spans industries and applications with little more than a simple swipe, regardless of whether you work with GNSS, total stations or both.

 

Seamlessly share data among all your instruments

Leica Infinity imports and combines data from your GNSS RTK rover, total station and level instruments for one final and accurate result. Processing has never been made easier when all your instruments work in tandem to produce precise and actionable information.

 

Customer care only a click away

Through Active Customer Care (ACC), a global network of experienced professionals is only a click away to expertly guide you through any challenge. Eliminate delays with superior technical service, finish jobs faster and avoid costly site revisits with excellent consultancy support. Control your costs with a tailored Customer Care Package (CCP), giving you peace of mind you are covered anywhere, anytime.

 

Specifications:

GNSS TECHNOLOGY
Self-learning GNSS Leica RTKplus: Adaptive on-the-fly satellite selection
SmartLink (worldwide correction service): Remote precise point positioning (3 cm 2D)1 Initial convergence to full accuracy typically 18 min, Re-convergence < 1 min
SmartLink fill (worldwide correction service): Bridging of RTK outages up to 10 min (3 cm 2D)
Leica SmartCheck Continuous check of RTK solution: Reliability 99.99%
Signal tracking GPS (L1, L2, L2C, L5), Glonass (L1, L2, L2C, L32), BeiDou (B1, B2, B32), Galileo (E1, E5a, E5b, Alt-BOC, E62), QZSS (L1, L2C, L5, L62), NavIC L53, SBAS (WAAS, EGNOS, MSAS, GAGAN), L-band
Number of channels 555 (more signals, fast acquisition, high sensitivity)
Tilt compensation Increased measurement productivity and traceability: Calibration-free Immune to magnetic disturbances
MEASUREMENT PERFORMANCE & ACCURACY
Time for initialisation Typically 4 s
Real-time kinematic (Compliant to ISO17123-8 standard) Single baseline: Hz 8 mm + 1 ppm / V 15 mm + 1 ppm
Network RTK: Hz 8 mm + 0.5 ppm / V 15 mm + 0.5 ppm
Real-time kinematic tilt compensated Topographic points (not for static control points): Additional Hz pole tip uncertainty typically less than 8 mm + 0.4 mm/° tilt down to 30° tilt
Post processing Static (phase) with long observations: Hz 3 mm + 0.1 ppm / V 3.5 mm + 0.4 ppm
Static and rapid static (phase): Hz 3 mm + 0.5 ppm / V 5 mm + 0.5 ppm
Code differential DGPS / RTCM: Typically 25 cm
COMMUNICATIONS
Communication ports Lemo: USB and RS232 serial
Bluetooth®: Bluetooth® v2.1 + EDR, class 1.5
Communication protocols RTK data protocols: Leica, Leica 4G, CMR, CMR+, RTCM 2.2, 2.3, 3.0, 3.1, 3.2 MSM
NMEA output:  NMEA 0183 v4.00 and Leica proprietary
Network RTK: VRS, FKP, iMAX, MAC (RTCM SC 104)
Built-in data links GSM / UMTS / LTE phone modem: Fully integrated, external antenna
Radio modem: Fully integrated, receive and transmit, external antenna 403 - 473 MHz, 1 W output power, up to 28800 bps over air
External data links GSM / GPRS / UMTS / LTE / CDMA and UHF / VHF modem
GENERAL
Field controller and software Leica Captivate software: Leica CS20 field controller, Leica CS35 tablet
User interface Buttons and LEDs: On / Off and Function button, 8 status LEDs
Web server: Full status information and configuration options
Data recording Storage: Removable SD card, 8 GB
Data type and recording rate: Leica GNSS raw data and RINEX data at up to 20 Hz
Power management Internal power supply: Exchangeable Li-Ion battery (2.8 Ah / 11.1 V)
External power supply: Nominal 12 V DC, range 10.5 - 26.4 V DC
Operation time: 7h receiving (Rx) data with internal radio, 5 h transmitting (Tx) data with internal radio, 6 h Rx/Tx data with internal phone modem
Weight and dimensions Weight: 1.20 kg / 3.50 kg standard RTK rover setup on pole
Dimensions: 173 mm x 173 mm x 108 mm
Environmental Temperature: -40 to 65°C operating, -40 to 85°C storage
Drop: Withstands topple over from a 2 m survey pole onto hard surfaces
Proof against water, sand and dust: IP66 / IP68 (IEC60529 / MIL STD 810G CHG-1 510.6 I / MIL STD 810G CHG-1 506.6 II / MIL STD 810G CHG-1 512.6 I)
Vibration: Withstands strong vibration (ISO9022-36-08 / MIL STD 810G 514.6 Cat.24)
Humidity: 95% (ISO9022-13-06 / ISO9022-12-04 / MIL STD 810G CHG-1 507.6 II)
Functional shock: 40 g / 15 to 23 msec (MIL STD 810G 516.6 I)