More Views

Bosch GPL 3 3-Point Self-Leveling Alignment Laser

Quick Overview

Intended for determining and checking horizontal and vertical lines and plumb points. This tool is suitable for indoor and outdoor use.
SKU: X2508
Item ID: X2508
Condition: NEW
Warranty: 90 Day Exchange
$119.00
OR

Included

* Bosch GPL 3 Professional Self Leveling Laser [ID- X2508]

Details

Bosch GPL3 Self Leveling Laser
The measuring tool is intended for determining and checking horizontal and vertical lines and plumb points. The measuring tool is suitable for indoor and outdoor use.

Automatic Levelling
Position the measuring tool on a level, firm surface. After switching on, the automatic levelling function automatically compensates irregularities within the self-levelling range from ±5° (longitudinal axis) and ±3° (lateral axis). The levelling is finished as soon as the laser beams do not move any more. If automatic levelling is not possible, e.g. because the surface on which the measuring tool stands deviates by more than 5°/3° from the horizontal plane, the laser beams will flash quickly. If this is the case, set up the measuring tool in a level position and wait for the self-levelling to take place. As soon as the measuring tool is within the self-levelling range of ±5/±3°, the laser beams will light up continuously. In case of ground vibrations or position changes during operation, the measuring tool is automatically levelled again. After each levelling process, check the position of the horizontal and/or vertical laser beams in relation to the reference points to avoid errors arising from a change in the measuring tool's position.

Specifications:

Article Number 3 601 K66 1
Working range 30 m
Levelling accuracy ±0.3 mm/m
Self-levelling range (typical) along the longitudinal axis ±5°
lateral axis ±3°
Typical levelling time <4 s
Operating temperature −10 °C to +40 °C
Storage temperature −20 °C to +70 °C
Max. altitude 2000 m
Relative air humidity max. 90 %
Pollution degree according to IEC 61010-1 2
Laser class 2
Laser type 635 nm, <1 mW
C6 1
Divergence 0.8 mrad (full angle)
Tripod mount 1/4"
Batteries 3 × 1.5 V LR6 (AA)
Approx. operating time 24 h
Weight according to EPTA-Procedure 01:2014 0.25 kg
Dimensions (length × width × height) 104 × 40 × 80 mm
Protection rating IP 5X