Trimble S3 2" Robotic Total Station [ID- X1637] |
Trimble TSC2 2.4GHz Survey Controller [ID- X1575] |
- 2.4GHz Antenna - Robotic - Active Tracking - Calibrated By A Trimble Authorized Service Center |
- Trimble Survey Controller Version 12.50 - GNSS Surveying - TS Surveying - Advanced Geodetic Support - 2.4GHz Radio |
Trimble S3 Total Station EVERYTHING YOU NEED FOR EFFICIENT SURVEYING CAMPAIGNS All you need to perform efficient surveying campaigns is included in the Trimble® S3 Robotic Total Station solution: An accurate and reliable instrument, integrated robotic radio and popular Trimble TSC3 controller optimized for Trimble Access field software, integrated high capacity battery and dual charger. The Trimble TSC3 controller, included in the robotic solution, is a groundbreaking handheld field computing solution that streamlines the flow of everyday surveying work and the number of peripheral devices you need in the field. The new Trimble S3 Total Station is backed by Trimble’s extensive and knowledgeable dealer network providing world-class training, service, and support to maintain your productivity. Whether you need to equip a new survey crew, replace older gear, or start a new office, the Trimble S3 Total Station can be depended on to get the job done well. PROVEN, RELIABLE TRIMBLE TECHNOLOGY The Trimble S3 Total Station is built upon proven Trimble technologies. The instrument contains the reliable servo drives based on MagDrive™ electro-magnetic technology with fewer moving parts which reduce servicing requirements. It also includes intelligent battery and power management systems for 6 hours of operation on a single battery, and Trimble DR technology providing exceptional measurement performance and accuracy. TRIMBLE DR TECHNOLOGY Direct Reflex (DR) technology from Trimble enables measurement without a prism on almost any type of surface. Operators in the field can capture information on hard-to-reach targets in dangerous/ unsafe locations. Measure quickly and safely without compromising accuracy. Overhead cables, tunnels, bridges, quarry faces, stockpiles, buildings, and elevations can all be measured quickly, easily, and safely. COAXIAL OPTICS, EDM, TRACKER, LASER POINTER The Trimble S3 Total Station optics by Carl Zeiss are fully coaxial for measurement confidence and reliability. With over 100 years of high accuracy optical instrument knowledge and expertise, Trimble builds the Trimble S3 system with the same high standards of quality that Trimble is known for. HIGH CAPACITY INTERNAL BATTERY WITH INTELLIGENT SYSTEM CHARGER The Trimble S3 runs for six hours in Robotic mode on one internal integrated lithium-ion battery, with no cable needed. With intelligent batteries, you can immediately check how much power each battery contains. The convenient, all-in-one battery charger included in the Trimble S3 package, allows you to simultaneously recharge your total station and GPS/GNSS system batteries in the same charger. Servo and Auotkcokc The Trimble S3 Total Stations are also available in servo or autolock only versions. The Trimble S3 Servo and Autolock versions contain a fixed Control Unit with Trimble Access on board for convenient, simple operation in any environment. STEPPING INTO INTEGRATED SURVEYING The Trimble S3 Total Station provides the foundation for Trimble’s Integrated Surveying™ solutions. With Integrated Surveying, you can seamlessly integrate complementary technologies on the job site, such as Trimble GPS/GNSS and optical measurements, which allows you to use the most appropriate tool for the jobsite conditions. Trimble’s field and office software combine and manage all the data, making it easy to take advantage of the best that each technology has to offer. Combine the Trimble S3 with Trimble’s GNSS receivers to create a Trimble I.S. Rover and start reaping the productivity gains from Integrated Surveying. Features:
- Everything you need to perform efficient surveying jobs
- Built on proven, reliable, Trimble technology
- Dependability backed by world-class training, service, and support
- Foundation for Integrated Surveying
Specifications:
PERFORMANCE |
Angle measurement |
Accuracy (Standard deviation based on DIN 18723) |
2" (0.6 mgon) |
Angle reading (least count) |
Standard |
1" (0.3 mgon) |
Tracking |
2" (0.6 mgon) |
Averaged observations |
0.1" (0.03 mgon) |
Automatic level compensator |
Type |
Centered dual-axis |
Accuracy |
0.5" (0.15 mgon) |
Range |
5' (±100 mgon) |
Distance measurement |
Accuracy (RMSE) Prism mode |
Standard 2 mm + 2 ppm (0.0065 ft + 2 ppm) |
Standard deviation according to ISO17123-4 |
1.5 mm + 2 ppm (0.0049 ft + 2 ppm) |
Tracking |
5 mm + 2 ppm (0.016 ft + 2 ppm) |
DR mode |
Standard measurement: 3 mm + 2 ppm (0.01 ft + 2 ppm) |
Tracking |
10 mm + 2 ppm (0.032 ft + 2 ppm) |
Measuring time Prism mode |
Standard: 2 sec Tracking: 0.4 sec |
DR mode |
Standard: 3–15 sec Tracking: 0.4 sec |
Range (under standard clear conditions) Prism mode |
1 prism: 2,500 m (8,202 ft) 3 prism: 5,000 m (16,404 ft) Shortest possible range: 1.5 m (4.92 ft) |
DR mode |
Reflective foil 20 mm: >200 m (656 ft) Reflective foil 60 mm: >500 m (1,640 ft) Shortest possible range: 1.5 m (4.9 ft) |
EDM SPECIFICATIONS |
Light source |
Laser diode 660 nm; Laser class 1 in Prism mode, Laser class 3R in DR mode |
Laser pointer coaxial (standard) |
Laser class 3R |
Beam divergence Prism mode |
Horizontal: 4 cm/100 m (0.13 ft/328 ft) Vertical: 4 cm/100 m (0.13 ft/328 ft) |
Beam divergence DR mode |
Horizontal: 2 cm/50 m (0.066 ft/164 ft) Vertical: 2 cm/50 m (0.066 ft/164 ft) |
Atmospheric correction |
–130 ppm to 160 ppm continuously |
GENERAL SPECIFICATIONS |
Leveling |
Circular level in tribrach: 8'/2 mm (8'/0.007 ft) Electronic 2-axis level in the LC-display with a resolution of: 0.3" (0.1 mgon) |
Servo system |
MagDrive servo technology, integrated servo/angle sensor electromagnetic direct drive |
Rotation speed |
86 degrees/sec |
Rotation time Face 1 to Face 2 |
3.2 sec |
Positioning speed |
3.2 sec |
Clamps and slow motions: |
Servo-driven, endless fine adjustment |
Centering |
Centering system: Trimble 3-pin Optical plummet: In Tribrach Magnification/shortest focusing distance: 2.3×/0.5 m to infinity (1.6 ft to infinity) |
Telescope |
Magnification: 30× Aperture: 40 mm (1.57 in) Field of view at 100 m (328 ft): 2.6 m at 100 m (8.5 ft at 328 ft) Shortest focusing distance: 1.5 m (4.92 ft to infinity Illuminated crosshair: Variable (10 steps) |
Tracklight built in |
Standard |
Operating temperature |
–20 ºC to +50 ºC (–4 ºF to +122 ºF) |
Dust and water proofing |
IP55 |
Humidity` |
100% condensing |
Power supply |
Internal battery: Rechargeable Li-Ion battery 11.1 V, 4.4 Ah Operating time One internal battery: Approx. 6 hours |
Weight |
Instrument (Servo & Autolock): 5.6 kg (12.35 lb) Instrument (Robotic): 5.25 kg (11.57 lb) Tribrach: 0.7 kg (1.54 lb) Internal battery: 0.35 kg (0.77 lb) |
Trunnion axis height: |
196 mm (7.71 in) |
Communication |
USB, Serial |
ROBOTIC SURVEYING |
Robotic Range |
Passive prisms (Active prisms optional): 300–500 m (984–1,640 ft) |
Shortest search distance |
0.2 m (0.65 ft) |
Type of radio internal/external: |
2.4 GHz frequency-hopping, spread-spectrum radio |
Search time (typical) |
2–10 sec |
Servo & Autolock Control PAn |
Display |
QVGA,16 bit color, TFT LCD, backlit (320x240 pixel) |
Keyboard |
19-key alpha-numeric + 4-way arrow key, dedicated navigation and instrument control key(s) |
Audio |
Integrated speaker for audio systems events, warnings and notifications |
Operating system |
Windows Embedded CE 6.0 |
Memory |
128 MB SDRAM, 128 MB Flash Memory |
Processor |
624 MHz Marvell ARM920T-PXA300 CPU |
Trimble TSC2 Controller Data Collector COMBINE FIELD AND OFFICE IN ONE POWERFUL HANDHELD COMPUTER The Trimble® TSC2® Controller is an advanced handheld computer especially designed for Trimble optical and GPS surveying systems. With the Microsoft® Windows Mobile™ 5.0 software operating system, the TSC2 controller runs your choice of powerful Trimble field software. Add specialized applications to the standard Microsoft Outlook Mobile, Excel Mobile, Word Mobile, Power Point Mobile and Internet Explorer programs, and the TSC2 controller becomes a powerhouse of field and office functions on one rugged business device. SMART, EXPANDABLE HARDWARE Every innovative feature on the TSC2 controller is designed to make your job easier. Clearly view background maps and check work on the vibrant color graphic display for greater data control and confidence. Use the full alphanumeric keyboard, or quickly select software options using the touch screen.The unique TSC2 controller changeable cap enables the use of removable memory or third-party media, such as GPRS, GPS, camera, and product scanner functions. Extend your data logging capabilities and experience a major leap in productivity. INDUSTRY-LEADING COMMUNICATION TECHNOLOGIES Eliminate cable hassles and expedite setup with integrated Bluetooth® wireless technology. When the TSC2 controller is used with a Trimble R8 or 5800 GPS system, the rover is 100% cable free for unsurpassed convenience and ease of use. The internal 2.4 GHz radio option is ideal for use with a robotic system such as the Trimble S6 total station. Using the expandable media function, a GSM/GPRS modem can add full wireless communication to the Internet in the field.Transfer data in your office over a wireless 802.11 LAN—again, no cables are required. You can also use hotspots to quickly and securely share data with your office from remote locations. FLEXIBLE COMMUNICATION OPTIONS Choose the method of data transfer that suits your situation. Using an external modem such as a cell phone with Bluetooth, send and receive files over the Internet from the field: you don’t need to drive back to the office. In the office, internal 802.11 technology provides wireless connection to your network. The TSC2 controller also provides USB and serial RS232 communication options; data can be transferred to a PC or another TSC2 controller using a cable, Bluetooth, CompactFlash, or Secure Digital memory card media. ONE CONTROLLER, ONE SOFTWARE, ONE INTERFACE The TSC2 controller is central to Integrated Surveying™ from Trimble. With an application such as the Trimble Survey Controller™ software onboard, collect and manage both GPS and optical data in one Job file simply by switching the TSC2 controller between sensors. Standardize on one flexible controller for maximized investment. And your survey team only needs to know one interface. When field work is complete, simply transfer the Job file to your office using the communication method that suits your needs. Features:
- Advanced handheld field computer for exceptional versatility, efficiency, and freedom
- Microsoft Windows Mobile operating system 5.0 software
- Highest flexibility for optical and GPS surveying
- Wireless operations in both the field and office
Specifications:
Physical |
Size |
266 mm × 131 mm × 48 mm (10.5 in × 5.2 in × 1.9 in); 76 mm (3.0 in) at handgrip |
Weight |
0.95 kg (2.1 lb) including battery; 1.09 kg (2.4 lb) including battery and optional internal radio |
Memory |
128 MB SDRAM, 512 MB internal non-volatile storage memory |
Expandable Memory |
CompactFlash (CF) card Secure Digital (SD) card |
Processor |
520 MHz Intel® PXA 270 XScale CPU |
Wireless |
Integrated Wireless LAN 802.11b |
Power |
Li-Ion rechargeable pack, 6600 mAh, battery life of 30 hours under normal operating conditions Fast charge to 80% in 2 hours; full charge in 4.5 hours. Battery charge status LED indicator |
Software |
The Trimble TSC2 controller runs the Trimble Survey Controller field software. In addition, a number of regional solutions are available. For more information on the field software that’s best for you, contact your local Trimble authorized distribution partner. |
Environmental |
Temperature Operating Temperature |
–30 °C to +60 °C (–22 °F to +140 °F) |
Storage Temperature |
–40 °C to +70 °C (–40 °F to +158 °F) |
Humidity |
100% condensing, MIL-STD-810F, Method 507.4 |
Sand & Dust |
Protection against wind-driven according to MIL-STD-810F, and IP6X |
Water |
Waterproof IPX7 |
Drops |
26 drops from 1.22 m (4.0 ft) onto hard surface |
Vibration |
MIL-STD-810F, Method 514.5, Procedure I, Fig. 17 & 18 |
Altitude |
MIL-STD-810F, Method 500.4, Procedures I, II & III, 4572 m (15,000 ft) at +23 °C (+73 °F) |
Interface |
Display |
Color, illuminated TFT, daylight-readable touch screen displayed at 320 × 240 pixels |
Keyboard |
53 key alphanumeric keypad, 8-position spider key |
Audio |
Integrated speaker and microphone for audio system events, warnings and notifications. |
Operating system |
Microsoft Windows Mobile 5.0 |
Input/Output |
Ports |
RS232 9-pin serial port USB Client USB Host DC Power Port |
Expansion |
1 × Type I CompactFlash (CF) slot 1 × Type II CompactFlash (CF) slot 1 × Secure Data (SD) memory card slot |
|