More Views

CAT MS980 Grade Control GPS Receiver Set

Quick Overview

CAT MS980 Grade Control GPS Receiver Set

This Is Not A Full GCS900 Kit, This Kit Is Missing Some Accessories Required For Complete Setup, Accessories Vary For Each Setup

Item ID: X1217 X1218
Condition: Refurbished
Warranty: 90 Day Exchange


* QTY. 2 CAT MS980 Grade Control GPS Receivers [ID- X1217 X1218]
* User Manual On CD-ROM
* Hard Carrying Case


Caterpillar MS980 GPS Receiver Set
The MS980 Smart GPS Antenna is an integrated GPS receiver and antenna designed to provide maximum portability and flexibility. It has been specifically designed for machine installation in the harsh construction environment, and has extensive field- proven performance in mining and construction applications. The dual antenna configuration is unique to Trimble GPS-based Grade Control Systems. Using GPS, the exact position, very accurate cross slope, and heading of the blade or bucket are measured. This is especially advantageous for complex design surfaces such as super-elevation grading tasks. The MS980 can also be used in a single antenna configuration on scrapers and motor graders. Ideal for a wide range of machines, you can use the MS980 Smart GPS Antenna for GCS900 blade control to 20-30 millimeters (0.1 foot).


MS980 GPS Receiver
Operating Temperature: -40°C to 70°C (-40°F to 160°F)
Storage Temperature: -50°C to 85°C (-67°F to 185°F)
Input Voltage: 9 to 32 V DC
Maximum Amperage: 1.5 amp
Horizontal Accuracy: 20 mm (.78 in)
Vertical Accuracy: 30 mm (1.2 in)
Initialization: Automatic
Range: Up to 10 km (6.2 miles) from base station
Start-up: <2 min
3 LED status indicators
Upper LED: Power On
Middle LED: Radio Signal Received
Lower LED: GPS Signal Received
Control Interface: SAE J1939 CAN
Network Connector: 16-pin
Height: 147 mm (5.8 in)
Width: 232 mm (9.1 in)
Depth: 251 mm (9.9 in)
Weight: 3.8 kg (8.3 lb)