hit
counter

Trimble R8 Model 3 GPS GLONASS 430-450 MHz Base & Rover Set w/ TSC2

Quick Overview

Trimble R8 Model 3 GPS GLONASS Antenna Base And Rover Receiver Set 430 - 450 MHz w/ TSC2 Field Controller
SKU: GPS94
Item ID: X1895 X1643 X1851
Condition: Refurbished
Warranty: 90 Day Exchange

Included

* Trimble R8 Model 3 GPS GLONASS Antenna Receiver P/N: 67250-64 w/ Options... [ID- X1895]
          - CMR Inputs
          - CMR Outputs
          - RTCM Inputs
          - RTCM Outputs
          - Data Collector
          - Binary Outputs
          - Data Logging
          - Bluetooth
          - L2CS
          - UHF Transmit
          - Cellular
          - L5
          - Enable GLONASS
          - Enable WebServer
          - Login Required
          - Software Version 4.84
          - Boot Version 4.46
          - Radio Version 4.80s
          - 430 - 450 MHz Radio Module P/N: 64235-64
          - Serviced By A Trimble Authorized Factory Service Center
* Trimble R8 Model 3 GPS GLONASS Antenna Receiver P/N: 67250-64 w/ Options... [ID- X1643]
          - CMR Inputs
          - CMR Outputs
          - RTCM Inputs
          - RTCM Outputs
          - Data Collector
          - Binary Outputs
          - Data Logging
          - Bluetooth
          - L2CS
          - UHF Transmit
          - Cellular
          - L5
          - Enable GLONASS
          - Enable Webserver
          - Login Required
          - Software Version 4.43
          - Boot Version 4.41
          - Radio Version 4.40
          - 430 - 450 MHz Radio Module P/N: 64235-64
          - Serviced By A Trimble Authorized Factory Service Center
* Trimble TSC2 Survey Field Controller w/ Options... [ID- X1851]
         - Survey Controller Version 12.50
         - GNSS Surveying
         - TS Surveying
         - Advanced Geodetic Support
* QTY. 3 Antennas
* Trimble 61116-00 Battery Charger
* Trimble Extension Pole
* Stylus
* QTY. 2 Batteries
* QTY. 2 AC Adapter/Chargers
* QTY. 2 Power Cords
* QTY. 3 RS232 PC Interface Cables
* USB PC Interface Cable
* User Manual On Cd-ROM
* Hard Carrying Case

Details

Trimble R8 Model 3 GPS GLONASS Antenna Receiver w/ Options... [ID- X1895] Trimble R8 Model 3 GPS GLONASS Antenna Receiver w/ Options... [ID- X1643] Trimble TSC2 Survey Field Controller w/ Options... [ID- X1851]
- CMR Inputs
- CMR Outputs
- RTCM Inputs
- RTCM Outputs
- Data Collector
- Binary Outputs
- Data Logging
- Bluetooth
- L2CS
- UHF Transmit
- Cellular
- L5
- Enable GLONASS
- Enable WebServer
- Login Required
- Software Version 4.84
- Boot Version 4.46
- Radio Version 4.80s
- 430 - 450 MHz Radio Module P/N: 64235-64
- Serviced By A Trimble Authorized Factory Service Center
- CMR Inputs
- CMR Outputs
- RTCM Inputs
- RTCM Outputs
- Data Collector
- Binary Outputs
- Data Logging
- Bluetooth
- L2CS
- UHF Transmit
- Cellular
- L5
- Enable GLONASS
- Enable Webserver
- Login Required
- Software Version 4.43
- Boot Version 4.41
- Radio Version 4.40
- 430 - 450 MHz Radio Module P/N: 64235-64
- Serviced By A Trimble Authorized Factory Service Center
- Survey Controller Version 12.50
- GNSS Surveying
- TS Surveying
- Advanced Geodetic Support


Trimble R8 Model 3 Receiver

The Trimble R8 GNSS delivers the latest advancements in R-Track™ technology, designed to deliver reliable, precise positioning performance . In challenging areas for GNSS surveying, such as tree cover or limited sky view, Trimble R-Track provides unmatched tracking performance of GNSS satellite signals .

Trimble R-Track with Signal Prediction™ compensates for intermittent or marginal RTK correction signals, enabling extended precision operation after an RTK signal is interrupted .

The new CMRx communications protocol provides unprecedented correction compression for optimized bandwidth and full utilization all of the satellites in view, giving you the most reliable positioning performance .

Featuring the Trimble Maxwell™ 6 chip, the Trimble R8 GNSS advances the industry with more memory and more GNSS channels . Trimble delivers business confidence with a sound GNSS investment for today and into the future .

Broad GNSS support
The Trimble R8 GNSS supports a wide range of satellite signals, including GPS L2C and L5 and GLONASS L1/L2 signals . In addition, Trimble is committed to the next generation of modernized GNSS configurations by providing Galileo-compatible products available for customers well in advance of Galileo system availability 1,2 . In support of this plan, the new Trimble R8 GNSS is capable of tracking the experimental GIOVE-A and GIOVE-B test satellites for signal evaluation and test purposes .

Flexible System Design
 The Trimble R8 GNSS receiver combines the most comprehensive feature set into an integrated and flexible system for demanding surveying applications . The Trimble R8 GNSS includes a built-in transmit/receive UHF radio, enabling ultimate flexibility for rover or base operation . As a base station, the internal NTRIP caster provides you with customized access 3 to base station corrections via the internet .

Trimble’s exclusive, Web UI™ eliminates travel requirements for routine monitoring of base station receivers . Now you can assess the health and status of base receivers and perform remote configurations from the office . Likewise, you can download post-processing data through Web UI and save additional trips out to the field .

Enabling The Connected Site
 Pair the speed and accuracy of the Trimble R8 GNSS receiver with flexibility and collaboration tools of Trimble Access™ software . Trimble Access brings field and office teams closer by enabling data sharing and collaboration in a secure, web-based environment . With optional streamlined workflows, Trimble Access further empowers surveyors and survey teams for success . Now it is easier than ever to realize the potential of the Trimble Connected Site . Connecting the right tools, techniques, services and relationships enables surveying businesses to achieve more every day


Performance Specifications Measurements:
• Trimble R-Track technology
• Advanced Trimble Maxwell 6 Custom Survey GNSS chip with 220 channels
• High precision multiple correlator for GNSS pseudorange measurements
• Unfiltered, unsmoothed pseudorange measurements data for low noise, low multipath error, low time domain correlation and high dynamic response
• Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth
• Signal-to-Noise ratios reported in dB-Hz
• Proven Trimble low elevation tracking technology
• Satellite signals tracked simultaneously:
 – GPS: L1C/A, L2C, L2E (Trimble method for tracking L2P), L5
 – GLONASS: L1C/A, L1P, L2C/A (GLONASS M only), L2P
 – SBAS: L1C/A, L5
 – Galileo GIOVE-A and GIOVE-B


Specifications:
Code Differential GNSS Positioning
Horizontal
0 .25 m + 1 ppm RMS
Vertical
0 .50 m + 1 ppm RMS
WAAS differential positioning accuracy
typically <5 m 3DRMS
Static and FastStatic GNSS surveying
Horizontal
3 mm + 0 .1 ppm RMS
Vertical
3 .5 mm + 0 .4 ppm RMS
Kinematic surveying
Horizontal
10 mm + 1 ppm RMS
Vertical
20 mm + 1 ppm RMS
Initialization Time
typically <10 seconds
Initialization reliability
typically >99.9%
Physical Hardware
Dimensions (W×H) 19 cm × 11 .2 cm (7 .5 in x 4 .4 in), including connectors
Weight
1 .34 kg (2 .95 lb) with internal battery, internal radio, standard UHF antenna
3 .70 kg (8 .16 lb) entire RTK rover including batteries, range pole, controller and bracket
Temperature Operating: –40 °C to +65 °C (–40 °F to +149 °F)
Storage: –40 °C to +75 °C (–40 °F to +167 °F)
Humidity
100%, condensing
Water/dustproof
IP67 dustproof, protected from temporray immersion to depth of 1 m (3.28 ft)
Shoack and vibration
Tested and meets the following environmental standards:
Shock: Non-operating: Designed to survive a 2 m (6 .6 ft) pole drop onto concrete . Operating: to 40 G, 10 msec, sawtooth
Vibration: MIL-STD-810F, FIG .514 .5C-1
Electrical
  • Power 11 to 28 V DC external power input with over-voltage protection on Port 1 (7-pin Lemo)
  • Rechargeable, removable 7 .4 V, 2 .4 Ah Lithium-Ion battery in internal battery compartment . Power consumption is 3 .2 W, in RTK rover mode with internal radio.
    Operating times on internal battery:  450 MHz receive only option: 5 .8 hours 450 MHz receive/transmit option: 3 .7 hours
  • Certification Class B Part 15, 22, 24 FCC certification, 850/1900 MHz . Class 10 GSM/GPRS module . CE Mark approval, and C-tick approval
Communications and Data Storage
  • 3-wire serial (7-pin Lemo) on Port 1 . Full RS-232 serial on Port 2 (Dsub 9 pin)
  • Fully Integrated, fully sealed internal 450 MHz receiver/transmitter option:
    • Transmit power: 0 .5 W
    • Range : 3–5 km typical / 10 km optimal
  • Fully integrated, fully sealed internal GSM/GPRS option
  • Fully integrated, fully sealed 2 .4 GHz communications port (Bluetooth®)
  • External cellphone support for GSM/GPRS/CDPD modems for RTK and VRS operations
  • Data storage on 57 MB internal memory: 40 .7 days of raw observables (approx . 1 .4 MB /Day), based on recording every 15 seconds from an average of 14 satellites
  • 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz positioning
  • CMR+, CMRx, RTCM 2 .1, RTCM 2 .3, RTCM 3 .0, RTCM 3 .1 Input and Output
  • 16 NMEA outputs, GSOF, RT17 and RT27 outputs . Supports BINEX and smoothed carrier


Trimble TSC2 Controller Data Collector

COMBINE FIELD AND OFFICE IN ONE POWERFUL HANDHELD COMPUTER
The Trimble® TSC2® Controller is an advanced handheld computer especially designed for Trimble optical and GPS surveying systems.
With the Microsoft® Windows Mobile™ 5.0 software operating system, the TSC2 controller runs your choice of powerful Trimble field software. Add specialized applications to the standard Microsoft Outlook Mobile, Excel Mobile, Word Mobile, Power Point Mobile and Internet Explorer programs, and the TSC2 controller becomes a powerhouse of field and office functions on one rugged business device.

SMART, EXPANDABLE HARDWARE
Every innovative feature on the TSC2 controller is designed to make your job easier. Clearly view background maps and check work on the vibrant color graphic display for greater data control and confidence. Use the full alphanumeric keyboard, or quickly select software options using the touch screen.The unique TSC2 controller changeable cap enables the use of removable memory or third-party media, such as GPRS, GPS, camera, and product scanner functions. Extend your data logging capabilities and experience a major leap in productivity.

INDUSTRY-LEADING COMMUNICATION TECHNOLOGIES
Eliminate cable hassles and expedite setup with integrated Bluetooth® wireless technology. When the TSC2 controller is used with a Trimble R8 or 5800 GPS system, the rover is 100% cable free for unsurpassed convenience and ease of use. The internal 2.4 GHz radio option is ideal for use with a robotic system such as the Trimble S6 total station.
Using the expandable media function, a GSM/GPRS modem can add full wireless communication to the Internet in the field.Transfer data in your office over a wireless 802.11 LAN—again, no cables are required. You can also use hotspots to quickly and securely share data with your office from remote locations.

FLEXIBLE COMMUNICATION OPTIONS
Choose the method of data transfer that suits your situation. Using an external modem such as a cell phone with Bluetooth, send and receive files over the Internet from the field: you don’t need to drive back to the office. In the office, internal 802.11 technology provides wireless connection to your network. The TSC2 controller also provides USB and serial RS232 communication options; data can be transferred to a PC or another TSC2 controller using a cable, Bluetooth, CompactFlash, or Secure Digital memory card media.

ONE CONTROLLER, ONE SOFTWARE, ONE INTERFACE
The TSC2 controller is central to Integrated Surveying™ from Trimble. With an application such as the Trimble Survey Controller™ software onboard, collect and manage both GPS and optical data in one Job file simply by switching the TSC2 controller between sensors. Standardize on one flexible controller for maximized investment. And your survey team only needs to know one interface. When field work is complete, simply transfer the Job file to your office using the communication method that suits your needs.


Features:
  • Advanced handheld field computer for exceptional versatility, efficiency, and freedom
  • Microsoft Windows Mobile operating system 5.0 software
  • Highest flexibility for optical and GPS surveying
  • Wireless operations in both the field and office

Specifications:
Physical
Size
266 mm × 131 mm × 48 mm (10.5 in × 5.2 in × 1.9 in);
 76 mm (3.0 in) at handgrip
Weight
0.95 kg (2.1 lb) including battery;
 1.09 kg (2.4 lb) including battery and
 optional internal radio
Memory
128 MB SDRAM, 512 MB internal non-volatile storage memory
Expandable Memory
CompactFlash (CF) card
 Secure Digital (SD) card
Processor
520 MHz Intel® PXA 270 XScale CPU
Wireless
Integrated Wireless LAN 802.11b
Power
Li-Ion rechargeable pack, 6600 mAh, battery life
 of 30 hours under normal operating conditions
 Fast charge to 80% in 2 hours; full charge in 4.5 hours.
 Battery charge status LED indicator
Software
The Trimble TSC2 controller runs the
 Trimble Survey Controller field software. In addition, a number of
 regional solutions are available. For more information on the field
 software that’s best for you, contact your local
 Trimble authorized distribution partner.
Environmental
Temperature
Operating Temperature

–30 °C to +60 °C (–22 °F to +140 °F)
Storage Temperature
–40 °C to +70 °C (–40 °F to +158 °F)
Humidity
100% condensing, MIL-STD-810F, Method 507.4
Sand & Dust
Protection against wind-driven according
 to MIL-STD-810F, and IP6X
Water
Waterproof IPX7
Drops
26 drops from 1.22 m (4.0 ft) onto hard surface
Vibration
MIL-STD-810F, Method 514.5, Procedure I, Fig. 17 & 18
Altitude
MIL-STD-810F, Method 500.4, Procedures I, II & III,
 4572 m (15,000 ft) at +23 °C (+73 °F)
Interface
Display
Color, illuminated TFT, daylight-readable touch screen
 displayed at 320 × 240 pixels
Keyboard
53 key alphanumeric keypad, 8-position spider key
Audio
Integrated speaker and microphone for audio system events, warnings and notifications.
Operating system
Microsoft Windows Mobile 5.0
Input/Output
Ports
RS232 9-pin serial port
 USB Client
 USB Host
 DC Power Port
Expansion
1 × Type I CompactFlash (CF) slot
 1 × Type II CompactFlash (CF) slot
 1 × Secure Data (SD) memory card slot