Trimble SPS 780 Max Receiver Installed Options 902-928 MHz Radio Module P/N: 53620-90 |
TDS Ranger Data Collector Installed Options |
- CMR Inputs - CMR Outputs - RTCM Inputs - RTCM Outputs - Data Collector - Binary Outputs - Bluetooth - UHF Transmit - 902 - 928 MHz Radio P/N: - Serviced By A Trimble Authorized Service Center |
- WLAN - Bluetooth - SCS900 Software Version 2.92 Build 8 |
Trimble SPS780 MAX GPS Receiver The Trimble® SPS780 Smart GPS Antenna is the simple solution to all your site measurement and stakeout applications. The rugged smart antenna includes an integrated radio, GPS receiver, GPS antenna and battery in a single, lightweight housing designed for maximum portability, quick setup and optimal flexibility.
The SPS780 Smart GPS Antenna offers contractors an easy-to-use, wide area measurement system for a variety of site preparation and grade checking applications. It can be used as either a rover for site measurement and stakeout or as a base station for site measurement and machine control operations. As a base station, the SPS780 takes little or no setup time and only requires a single keystroke each day to start up.
Features:
- Small, lightweight design – 1.31 kg (2.89 lb) (receiver only with battery) 3.7 kg (8.16 lb) complete system weight (Rover including controller and rod)
- Quick setup, high mobility base and rover receiver system ideal for small to mid size jobsites and for working on multiple jobsites on a daily or weekly basis
- 24-channel L1/L2 GPS receiver
- Performs all site measurement and stakeout operations within >5 km (Max or Extreme)
- Internal, removable, smart Li Ion battery provides up to 5.5 hrs GPS rover operation per battery. Batteries can be changed when flat, and returned to office or truck for charging leaving the receivers working in the field.
- Bluetooth® wireless technology for cable free, no hassle base or rover operation
- Simple keypad with on/off key and LED indicators for power, radio and satellite tracking
- 10 Hz update rate
- Allows measurement from a moving platform e.g. mounted on a vehicle, boat or ATV for increased efficiency on large jobsites.
- Base station or base/rover receiver options
- Rover option offers 10 Hz measurement update rate
- Unrestricted rover operation range from the base station
- Rover operates within a VRS network for base station-free rover capability
Specifications:
General characteristics |
Keyboard and display |
On / Off key for one button start up |
LED indicators |
For satellite tracking, radio link reception and power monitoring |
Receiver type |
Fully integrated “Smart” GPS antenna |
Physical characteristics |
Dimensions (WxH) |
19 cm (7.5 in) x 10 cm (3.9 in) including connectors |
Weight |
1.28 kg (2.88 lb) receiver only with internal battery 3.70 kg (8.16 lbs) complete system weight (Rover including controller and pole) |
Temperature Operating Storage |
–40 °C to +65 °C (–40 °F to +149 °F) –40 °C to +75 °C (–40 °F to +167 °F) |
Humidity |
100%, condensing |
Waterproof |
IPX7 for submersion to depth of 1 m (3.28 ft) |
Shock and vibration Shock - non operating Shock – operating Vibration |
Tested and meets the following environmental standards: Designed to survive a 2m (6.6 ft) pole drop onto concrete To 40 G, 10 msec, sawtooth MIL-STD-810F, FIG.514.5C-1 |
Performance characteristics |
Measurements |
Advanced Trimble Maxwell™ Custom GPS chip
- High-precision multiple correlator for L1 and L2 pseudorange measurements
- Unfiltered, unsmoothed pseudorange measurements data for low noise, low multi-path error, low time domain correlation and high dynamic response
- Very low noise L1 and L2 carrier phase measurements with <1mm precision in a 1 Hz bandwidth
- L1 and L2 Signal-to-Noise ratios reported in dB-Hz
- Proven Trimble low elevation tracking technology
- 24 Channels L1 C/A Code
- L1/L2 Full Cycle Carrier
- WAAS/EGNOS support
|
Code differential GPS positioning Horizontal accuracy Vertical accuracy |
±(0.25 m + 1 ppm) RMS ±(0.5 m + 1 ppm) RMS |
WAAS differential positioning accuracy |
Typically <5m 3D RMS |
Real Time Kinematic (RTK) positioning Horizontal Vertical |
±(10 mm + 1 ppm) RMS, ±(0.032 ft +1 ppm) RMS ±(20 mm + 1 ppm) RMS, ±(0.065 ft +1 ppm) RMS |
Initialization time Regular RTK operation with base station |
Single/Multi-base minimum 10 seconds + 0.5 times baseline length in km, up to 30 km |
RTK operation with Scalable GPS infrastructure |
<30 seconds typical anywhere within coverage area |
Initialization reliability |
Typically >99.9% |
Electrical characteristics |
Power |
11 to 28 VDC external power input with over-voltage protection on Port 1 (7-pin Lemo) |
Battery |
Rechargeable, removable 7.4 V, 2.0 Ah Lithium–Ion battery in internal battery compartment. |
Power consumption |
<2.5 W, in RTK mode with internal radio |
Rover operation times on internal battery 450 MHz systems 900 MHz systems |
Receive only 5.5 hrs; varies with temperature Receive only 5.5 hrs: varies with temperature |
Base station operation times on internal battery 450 MHz systems 900 MHz systems |
Approximately 3.5 hrs; varies with temperature Approximately 5.5 hrs; varies with temperature |
Certification |
Class B Part 15, 22, 24 FCC certification, Canadian FCC, CE mark approval and C-tick approval |
Communications characteristics |
Communications |
Port 1 - 3-wire RS-232 (7-pin 0S Lemo) Port 2 - Full RS-232 (Dsub 9-pin) Fully integrated, fully sealed 2.4 GHz Bluetooth |
Integrated Radios
450MHz Transmitter radio power output |
Fully integrated, fully sealed internal 450 MHz, TX, RX or TXRX Fully integrated, fully sealed internal 900 MHz, RX only
0.5 w |
Receiver position update rate SPS780 Max |
1 Hz, 2 Hz, 5 Hz, and 10 Hz positioning |
Data Input and Output |
CMR II, CMR+, RTCM 2.1, RTCM 2.3, RTCM 3.0 |
Outputs |
14 NMEA, GSOF and RT17 |
Carrier |
Supports BINEX and smoothed carrier |
TDS Ranger Data Collector
Smart, tough and loaded with additional features Featuring Windows Mobile 5.0, the next-generation TDS Ranger possesses features that field professionals depend on, like field-ready ruggedness, 30-hour battery and an easy to use keypad and touchscreen. The Ranger grows more versatile as technology evolves, integrating more and more capabilities designed to improve your work life.
These rugged handheld devices have the advanced features that provide incredible performance with a wide touchscreen and an alphanumeric keypad. The TDS ranger has an advanced processor with the enormous assemble features that allows data to be transmitted at a faster speed as the mobile forces work together to assemble the data efficiently. Also the manageable drop and vibration and being dust free because of IP67 rating counts a lot in data security and reliability. Also, underwater seal is an good option with a touchscreen display of bright visibility.
Integrated features of these ranger devices includes GPS receiver that captures location data, where compass uses bearing data and the accelerometer utilizes the motion data. These functionalities are generally present in the Ranger specifications. The other specifications those are present in the other configurations of the ranger are LED flashlight, GPRS, GSM modem, barcode scanner.
The multiple options available for the Ranger devices to deliver expandability include Memory card slot, USB port and also the Serial port with the 1 year warranty feature. They have 128 MB flash storage that makes them really rugged and economical storage device. The SD slot is the main reason for the extra storage. The wireless adaptability includes both the WIFI and the Bluetooth for quick connection the other network, devices and the internet. The most appealing part is that there is no need of extra attachments or coding work.
The Operating system used in the TDS ranger is Microsoft Windows Mobile 5.0 which has the capability to offer much software to the users and a nice platform for the business purposes. You can use the MS office suite including the Power point with so much ease at your home. Also the less weight lithium ion battery usage with long hour battery backup with the ranger extends its usability.
Specifications:
OS |
Windows Mobile 5.0 |
CPU |
Intel® PXA 270 XScale CPU |
RAM (VOLATILE) |
64 or 128 MB SDRAM |
FLASH STORAGE MEMORY (NONVOLATILE) |
256 or 512 MB of NAND Flash |
DISPLAY |
Landscape 3.8” Color ¼ VGA display, sunlight readable, backlit |
BATTERY LIFE |
30 hours continuous room temperature operation with default settings and no backlight |
BATTERY CHARGING |
~4.5 hours to full charge; 80% charge in 2 hours |
BATTERY CAPACITY |
6600 mAh Lithium-Ion |
SOUND |
Integrated sealed speaker and microphone |
EXPANSION PORTS |
Optional 2 CF slots 1xType I and 1xType II, 1 SDIO slot |
ENVIRONMENTAL |
Submersible, drop-resistant, dust-proof (see Environmental section) |
INTEGRATED CAPABILITIES |
Optional Integrated Bluetooth and 802.11g (Wireless LAN) capability |
TEMPERATURE |
Operation: -30°C to +60°C (-22°F to +140°F) Storage: -40°C to +70°C (-40°F to +158°F) |
WATER |
Submersible to 1 meter for 30 minutes, IP67, MIL-STD 810F, Method 512.4, Procedure 1 |
DROP |
1.22 m (4.0 ft.) onto concrete |
SAND AND DUST |
Sealed against dust, IP67, MIL-STD 810F, Method 510.4, Procedures I and II |
VIBRATION |
Mil-STD 810F Method 514.5 |
ALTITUDE |
To 4572 m (15,000 ft) at a nominal temperature of +23°C (+73°F) Mil-STD 810F Method 500.4, Procedures I, II, & III |
EMI |
Meets FCC class B requirements |
|