Trimble SPS 780 Extreme 900MHz Receiver Installed Options 902-928 MHz Radio Module P/N: 53620-90 |
Trimble SPS 780 Max 900MHz Receiver Installed Options 902-928 MHz Radio Module P/N: 53620-90 |
Trimble TSC2 Data Collector Installed Options |
CMR Inputs CMR Outputs RTCM Inputs RTCM Outputs Data Collector Binary Outputs Bluetooth L2CS UHF Transmit Hardware Version 2.0
|
CMR Inputs CMR Outputs RTCM Inputs RTCM Outputs Data Collector Binary Outputs Bluetooth UHF Transmit Hardware Version 2.0
|
GPS Surveying TS Surveying Advanced Geodetic Support Bluetooth SCS900 Software v2.52
|
Trimble SPS780 Extreme GPS Receiver The Trimble® SPS780 Smart GPS Antenna is the simple solution to all your site measurement and stakeout applications. The rugged smart antenna includes an integrated radio, GPS receiver, GPS antenna and battery in a single, lightweight housing designed for maximum portability, quick setup and optimal flexibility.
The SPS780 Smart GPS Antenna offers contractors an easy-to-use, wide area measurement system for a variety of site preparation and grade checking applications. It can be used as either a rover for site measurement and stakeout or as a base station for site measurement and machine control operations. As a base station, the SPS780 takes little or no setup time and only requires a single keystroke each day to start up.
Features:
- Small, lightweight design – 1.31 kg (2.89 lb) (receiver only with battery) 3.7 kg (8.16 lb) complete system weight (Rover including controller and rod)
- Quick setup, high mobility base and rover receiver system ideal for small to mid size jobsites and for working on multiple jobsites on a daily or weekly basis
- 24-channel L1/L2 GPS receiver
- Performs all site measurement and stakeout operations within >5 km (Max or Extreme)
- Internal, removable, smart Li Ion battery provides up to 5.5 hrs GPS rover operation per battery. Batteries can be changed when flat, and returned to office or truck for charging leaving the receivers working in the field.
- Bluetooth® wireless technology for cable free, no hassle base or rover operation
- Simple keypad with on/off key and LED indicators for power, radio and satellite tracking
- 10 Hz update rate
- Allows measurement from a moving platform e.g. mounted on a vehicle, boat or ATV for increased efficiency on large jobsites.
- Base/Rover receiver interchangeability for ultimate GPS fleet flexibility
- Unrestricted rover operation range from the base station
- Either receiver can operate within a VRS network for base station-free rover capability
- L2C GPS signal modernization capability for enhanced performance in tough GPS environments
Specifications:
General characteristics |
Keyboard and display |
On / Off key for one button start up |
LED indicators |
For satellite tracking, radio link reception and power monitoring |
Receiver type |
Fully integrated “Smart” GPS antenna |
Physical characteristics |
Dimensions (WxH) |
19 cm (7.5 in) x 10 cm (3.9 in) including connectors |
Weight |
1.28 kg (2.88 lb) receiver only with internal battery 3.70 kg (8.16 lbs) complete system weight (Rover including controller and pole) |
Temperature Operating Storage |
–40 °C to +65 °C (–40 °F to +149 °F) –40 °C to +75 °C (–40 °F to +167 °F) |
Humidity |
100%, condensing |
Waterproof |
IPX7 for submersion to depth of 1 m (3.28 ft) |
Shock and vibration Shock - non operating Shock – operating Vibration |
Tested and meets the following environmental standards: Designed to survive a 2m (6.6 ft) pole drop onto concrete To 40 G, 10 msec, sawtooth MIL-STD-810F, FIG.514.5C-1 |
Performance characteristics |
Measurements |
Advanced Trimble Maxwell™ Custom GPS chip
- High-precision multiple correlator for L1 and L2 pseudorange measurements
- Unfiltered, unsmoothed pseudorange measurements data for low noise, low multi-path error, low time domain correlation and high dynamic response
- Very low noise L1 and L2 carrier phase measurements with <1mm precision in a 1 Hz bandwidth
- L1 and L2 Signal-to-Noise ratios reported in dB-Hz
- Proven Trimble low elevation tracking technology
- 24 Channels L1 C/A Code
- L1/L2 Full Cycle Carrier
- WAAS/EGNOS support
- Trimble R-Track™ technology for tracking the new L2C Civil Signal - GPS modernization
|
Code differential GPS positioning Horizontal accuracy Vertical accuracy |
±(0.25 m + 1 ppm) RMS ±(0.5 m + 1 ppm) RMS |
WAAS differential positioning accuracy |
Typically <5m 3D RMS |
Real Time Kinematic (RTK) positioning Horizontal Vertical |
±(10 mm + 1 ppm) RMS, ±(0.032 ft +1 ppm) RMS ±(20 mm + 1 ppm) RMS, ±(0.065 ft +1 ppm) RMS |
Initialization time Regular RTK operation with base station |
Single/Multi-base minimum 10 seconds + 0.5 times baseline length in km, up to 30 km |
RTK operation with Scalable GPS infrastructure |
<30 seconds typical anywhere within coverage area |
Initialization reliability |
Typically >99.9% |
Electrical characteristics |
Power |
11 to 28 VDC external power input with over-voltage protection on Port 1 (7-pin Lemo) |
Battery |
Rechargeable, removable 7.4 V, 2.0 Ah Lithium–Ion battery in internal battery compartment. |
Power consumption |
<2.5 W, in RTK mode with internal radio |
Rover operation times on internal battery 450 MHz systems 900 MHz systems |
Receive only 5.5 hrs; varies with temperature Receive only 5.5 hrs: varies with temperature |
Base station operation times on internal battery 450 MHz systems 900 MHz systems |
Approximately 3.5 hrs; varies with temperature Approximately 5.5 hrs; varies with temperature |
Certification |
Class B Part 15, 22, 24 FCC certification, Canadian FCC, CE mark approval and C-tick approval |
Communications characteristics |
Communications |
Port 1 - 3-wire RS-232 (7-pin 0S Lemo) Port 2 - Full RS-232 (Dsub 9-pin) Fully integrated, fully sealed 2.4 GHz Bluetooth |
Integrated Radios
450MHz Transmitter radio power output |
Fully integrated, fully sealed internal 450 MHz, TX, RX or TXRX Fully integrated, fully sealed internal 900 MHz, RX only
0.5 w |
Receiver position update rate SPS780 Extreme |
1 Hz, 2 Hz, 5 Hz, and 10 Hz positioning |
Data Input and Output |
CMR II, CMR+, RTCM 2.1, RTCM 2.3, RTCM 3.0 |
Outputs |
14 NMEA, GSOF and RT17 |
Carrier |
Supports BINEX and smoothed carrier |
Trimble SPS780 MAX GPS Receiver The Trimble® SPS780 Smart GPS Antenna is the simple solution to all your site measurement and stakeout applications. The rugged smart antenna includes an integrated radio, GPS receiver, GPS antenna and battery in a single, lightweight housing designed for maximum portability, quick setup and optimal flexibility.
The SPS780 Smart GPS Antenna offers contractors an easy-to-use, wide area measurement system for a variety of site preparation and grade checking applications. It can be used as either a rover for site measurement and stakeout or as a base station for site measurement and machine control operations. As a base station, the SPS780 takes little or no setup time and only requires a single keystroke each day to start up.
Features:
- Small, lightweight design – 1.31 kg (2.89 lb) (receiver only with battery) 3.7 kg (8.16 lb) complete system weight (Rover including controller and rod)
- Quick setup, high mobility base and rover receiver system ideal for small to mid size jobsites and for working on multiple jobsites on a daily or weekly basis
- 24-channel L1/L2 GPS receiver
- Performs all site measurement and stakeout operations within >5 km (Max or Extreme)
- Internal, removable, smart Li Ion battery provides up to 5.5 hrs GPS rover operation per battery. Batteries can be changed when flat, and returned to office or truck for charging leaving the receivers working in the field.
- Bluetooth® wireless technology for cable free, no hassle base or rover operation
- Simple keypad with on/off key and LED indicators for power, radio and satellite tracking
- 10 Hz update rate
- Allows measurement from a moving platform e.g. mounted on a vehicle, boat or ATV for increased efficiency on large jobsites.
- Base station or base/rover receiver options
- Rover option offers 10 Hz measurement update rate
- Unrestricted rover operation range from the base station
- Rover operates within a VRS network for base station-free rover capability
Specifications:
General characteristics |
Keyboard and display |
On / Off key for one button start up |
LED indicators |
For satellite tracking, radio link reception and power monitoring |
Receiver type |
Fully integrated “Smart” GPS antenna |
Physical characteristics |
Dimensions (WxH) |
19 cm (7.5 in) x 10 cm (3.9 in) including connectors |
Weight |
1.28 kg (2.88 lb) receiver only with internal battery 3.70 kg (8.16 lbs) complete system weight (Rover including controller and pole) |
Temperature Operating Storage |
–40 °C to +65 °C (–40 °F to +149 °F) –40 °C to +75 °C (–40 °F to +167 °F) |
Humidity |
100%, condensing |
Waterproof |
IPX7 for submersion to depth of 1 m (3.28 ft) |
Shock and vibration Shock - non operating Shock – operating Vibration |
Tested and meets the following environmental standards: Designed to survive a 2m (6.6 ft) pole drop onto concrete To 40 G, 10 msec, sawtooth MIL-STD-810F, FIG.514.5C-1 |
Performance characteristics |
Measurements |
Advanced Trimble Maxwell™ Custom GPS chip
- High-precision multiple correlator for L1 and L2 pseudorange measurements
- Unfiltered, unsmoothed pseudorange measurements data for low noise, low multi-path error, low time domain correlation and high dynamic response
- Very low noise L1 and L2 carrier phase measurements with <1mm precision in a 1 Hz bandwidth
- L1 and L2 Signal-to-Noise ratios reported in dB-Hz
- Proven Trimble low elevation tracking technology
- 24 Channels L1 C/A Code
- L1/L2 Full Cycle Carrier
- WAAS/EGNOS support
|
Code differential GPS positioning Horizontal accuracy Vertical accuracy |
±(0.25 m + 1 ppm) RMS ±(0.5 m + 1 ppm) RMS |
WAAS differential positioning accuracy |
Typically <5m 3D RMS |
Real Time Kinematic (RTK) positioning Horizontal Vertical |
±(10 mm + 1 ppm) RMS, ±(0.032 ft +1 ppm) RMS ±(20 mm + 1 ppm) RMS, ±(0.065 ft +1 ppm) RMS |
Initialization time Regular RTK operation with base station |
Single/Multi-base minimum 10 seconds + 0.5 times baseline length in km, up to 30 km |
RTK operation with Scalable GPS infrastructure |
<30 seconds typical anywhere within coverage area |
Initialization reliability |
Typically >99.9% |
Electrical characteristics |
Power |
11 to 28 VDC external power input with over-voltage protection on Port 1 (7-pin Lemo) |
Battery |
Rechargeable, removable 7.4 V, 2.0 Ah Lithium–Ion battery in internal battery compartment. |
Power consumption |
<2.5 W, in RTK mode with internal radio |
Rover operation times on internal battery 450 MHz systems 900 MHz systems |
Receive only 5.5 hrs; varies with temperature Receive only 5.5 hrs: varies with temperature |
Base station operation times on internal battery 450 MHz systems 900 MHz systems |
Approximately 3.5 hrs; varies with temperature Approximately 5.5 hrs; varies with temperature |
Certification |
Class B Part 15, 22, 24 FCC certification, Canadian FCC, CE mark approval and C-tick approval |
Communications characteristics |
Communications |
Port 1 - 3-wire RS-232 (7-pin 0S Lemo) Port 2 - Full RS-232 (Dsub 9-pin) Fully integrated, fully sealed 2.4 GHz Bluetooth |
Integrated Radios
450MHz Transmitter radio power output |
Fully integrated, fully sealed internal 450 MHz, TX, RX or TXRX Fully integrated, fully sealed internal 900 MHz, RX only
0.5 w |
Receiver position update rate SPS780 Max |
1 Hz, 2 Hz, 5 Hz, and 10 Hz positioning |
Data Input and Output |
CMR II, CMR+, RTCM 2.1, RTCM 2.3, RTCM 3.0 |
Outputs |
14 NMEA, GSOF and RT17 |
Carrier |
Supports BINEX and smoothed carrier |
Trimble SNB900 GPS Radio Imagine a radio link for GPS that does not require licensing and is virtually immune to jamming and interference. Trimble introduces the 900MHz product family, featuring the Trimble® SNB900, SNR900 and TNR900. The SNB900 radio is ideal for permanent or mobile base stations and repeaters. You can use the versatile SNB900 for a rover in a supervisor’s truck or on a range pole.
The 900MHz frequency offers many advantages for the construction site:
- Virtually immune to interference
- No licensing is required
- Low-latency, high-speed link allows two-way data between office and site machines
- Good operating ranges for construction sites. For areas in radio shadow, such as valleys, now it’s easy to place a SNB900 as a repeater.
- The internal battery provides added daily productivity, as setup is faster and easier.
Convenient Portability The SNB900 is so lightweight and portable, it fits in your jacket pocket to carry onto the jobsite. The built-in screen and keyboard make onsite setup and status checking even more convenient–you don’t need an external PC or data collector when in the field. You can set up operating modes, network configurations, port and display configurations, and check on battery status, radio status, operating mode, and network number. Then simply call the site office staff to check the status onscreen instead of driving there.
External Antenna The SNB900 features an external antenna that easily mounts on a single tripod with the GPS base antenna. The external antenna also lets you locate the SNB900 in a locked, secure position with only the antenna outside. Unlike systems with the radio antenna integrated into the top of the GPS antenna. Now it’s easy to place the antenna higher to achieve the greater range needed for base station applications. The external antenna also allows for any necessary lighting protection to be added.
Easy Setup You can quickly set up a repeater—just find a suitable location, place the SNB900, and turn it on. Because the SNB900 operates on internal batteries, it will run all day with no external power source. As many as four SNB900 repeaters, are supported from a single base station, with the ability to have three in a row. Since no setup software and PC/data collector are required to set up a repeater function, the reception statistics on the display make it easy to select an optimal location.
Internal battery The SNB900 operates all day with no external battery for fast set up as a repeater or base. Rover operation is simple since the no cables are required. Because the SNB900 internal battery has its own internal battery charger, when it’s connected to the site power supply, it is continually charged. If the site loses power, the radio will continue to operate uninterrupted for up to 10 hours.
Dual data links When you need dual data links on site, it is easy to connect an additional narrowband radio such as the Trimble® TRIMMARK3™ to the SNB900. This is possible as correction data can be passed through the SNB900 to a second radio.
Two-way IP data capable Connect the SNB900 to the TNR900 to create an IP access point onsite. The SNB900 access point does not have to be at the base station; it can be a repeater site—wherever the Internet connection is available onsite.
Features:
- 100% sealed weatherproof housing
- Keyboard and Vacuum Florescent Display (VFD)
- Internal battery lasts more than 10 hours in base operation
- External antenna
- Base, Repeater and Rover modes of operation
- Low-latency, high-speed data transmission of CMR, CMR+, RTCM-SC104
- Up to four SNB900 repeaters are supported from one base station, with the ability to have three in a row
- 902-928 MHz frequency band with frequency hopping (50 channels, 40 networks)
- Compatible with Trimble SNR900, SiteNet900, TRIMCOMM900, 5700/5800 internal radios
- Bluetooth connectivity
Specifications:
Physical characteristics |
Size |
Length: 140 mm (5.5") Width: 130 mm (5.1") Height: 55 mm (2.2") |
Weight |
1.06 kg (2.34 lb) |
Screen |
2 line, Vacuum Fluorescent Display |
Electrical characteristics |
Input Range |
10.5-32 VDC unconditioned |
Nominal |
3 watts |
Transmit |
12 watts |
Protection |
Reverse Polarity |
Connectors |
7-pin Lemo female, RS232/power; DB26 male, triple row, Ethernet/power |
Environmental characteristics |
Temperature |
Operating: -40°C to +65°C (-40°F to +149°F) Storage: -55°C to +75°C (-67°F to +167°F) |
Humidity |
100% RH |
Sealing |
Weather resistant |
Shock Vibration |
Class A, Personal Portable Equipment |
Radio modem performance |
Modes |
Base, Repeater, Rover |
Range |
Optimal: 10 km or more (6 miles), line of sight Typical: 3-5 km (2-3 miles) varies with terrain, antenna type and operating conditions. A repeater may be used to extend range |
Radio link |
Frequency range |
US/Canada: 902-928 MHz Australia: 917-928 MHz New Zealand: 921-928 MHz |
Networks |
40 user-selectable networks |
Transmit Power |
Meets FCC requirements of 30dBm maximum power. |
Wireless data rates |
128 kps |
Antenna |
Direct mount: 0 dB (Rover operation only) Whip: 0 dB, 5dB (with 5 m antenna cable) |
Trimble TSC2 Controller Data Collector COMBINE FIELD AND OFFICE IN ONE POWERFUL HANDHELD COMPUTER The Trimble® TSC2® Controller is an advanced handheld computer especially designed for Trimble optical and GPS surveying systems. With the Microsoft® Windows Mobile™ 5.0 software operating system, the TSC2 controller runs your choice of powerful Trimble field software. Add specialized applications to the standard Microsoft Outlook Mobile, Excel Mobile, Word Mobile, Power Point Mobile and Internet Explorer programs, and the TSC2 controller becomes a powerhouse of field and office functions on one rugged business device.
SMART, EXPANDABLE HARDWARE Every innovative feature on the TSC2 controller is designed to make your job easier. Clearly view background maps and check work on the vibrant color graphic display for greater data control and confidence. Use the full alphanumeric keyboard, or quickly select software options using the touch screen.The unique TSC2 controller changeable cap enables the use of removable memory or third-party media, such as GPRS, GPS, camera, and product scanner functions. Extend your data logging capabilities and experience a major leap in productivity.
INDUSTRY-LEADING COMMUNICATION TECHNOLOGIES Eliminate cable hassles and expedite setup with integrated Bluetooth® wireless technology. When the TSC2 controller is used with a Trimble R8 or 5800 GPS system, the rover is 100% cable free for unsurpassed convenience and ease of use. The internal 2.4 GHz radio option is ideal for use with a robotic system such as the Trimble S6 total station. Using the expandable media function, a GSM/GPRS modem can add full wireless communication to the Internet in the field.Transfer data in your office over a wireless 802.11 LAN—again, no cables are required. You can also use hotspots to quickly and securely share data with your office from remote locations.
FLEXIBLE COMMUNICATION OPTIONS Choose the method of data transfer that suits your situation. Using an external modem such as a cell phone with Bluetooth, send and receive files over the Internet from the field: you don’t need to drive back to the office. In the office, internal 802.11 technology provides wireless connection to your network. The TSC2 controller also provides USB and serial RS232 communication options; data can be transferred to a PC or another TSC2 controller using a cable, Bluetooth, CompactFlash, or Secure Digital memory card media.
ONE CONTROLLER, ONE SOFTWARE, ONE INTERFACE The TSC2 controller is central to Integrated Surveying™ from Trimble. With an application such as the Trimble Survey Controller™ software onboard, collect and manage both GPS and optical data in one Job file simply by switching the TSC2 controller between sensors. Standardize on one flexible controller for maximized investment. And your survey team only needs to know one interface. When field work is complete, simply transfer the Job file to your office using the communication method that suits your needs.
Features:
- Advanced handheld field computer for exceptional versatility, efficiency, and freedom
- Microsoft Windows Mobile operating system 5.0 software
- Highest flexibility for optical and GPS surveying
- Wireless operations in both the field and office
Specifications:
Physical |
Size |
266 mm × 131 mm × 48 mm (10.5 in × 5.2 in × 1.9 in); 76 mm (3.0 in) at handgrip |
Weight |
0.95 kg (2.1 lb) including battery; 1.09 kg (2.4 lb) including battery and optional internal radio |
Memory |
128 MB SDRAM, 512 MB internal non-volatile storage memory |
Expandable Memory |
CompactFlash (CF) card Secure Digital (SD) card |
Processor |
520 MHz Intel® PXA 270 XScale CPU |
Wireless |
Integrated Wireless LAN 802.11b |
Power |
Li-Ion rechargeable pack, 6600 mAh, battery life of 30 hours under normal operating conditions Fast charge to 80% in 2 hours; full charge in 4.5 hours. Battery charge status LED indicator |
Software |
The Trimble TSC2 controller runs the Trimble Survey Controller field software. In addition, a number of regional solutions are available. For more information on the field software that’s best for you, contact your local Trimble authorized distribution partner. |
Environmental |
Temperature Operating Temperature |
–30 °C to +60 °C (–22 °F to +140 °F) |
Storage Temperature |
–40 °C to +70 °C (–40 °F to +158 °F) |
Humidity |
100% condensing, MIL-STD-810F, Method 507.4 |
Sand & Dust |
Protection against wind-driven according to MIL-STD-810F, and IP6X |
Water |
Waterproof IPX7 |
Drops |
26 drops from 1.22 m (4.0 ft) onto hard surface |
Vibration |
MIL-STD-810F, Method 514.5, Procedure I, Fig. 17 & 18 |
Altitude |
MIL-STD-810F, Method 500.4, Procedures I, II & III, 4572 m (15,000 ft) at +23 °C (+73 °F) |
Interface |
Display |
Color, illuminated TFT, daylight-readable touch screen displayed at 320 × 240 pixels |
Keyboard |
53 key alphanumeric keypad, 8-position spider key |
Audio |
Integrated speaker and microphone for audio system events, warnings and notifications. |
Operating system |
Microsoft Windows Mobile 5.0 |
Input/Output |
Ports |
RS232 9-pin serial port USB Client USB Host DC Power Port |
Expansion |
1 × Type I CompactFlash (CF) slot 1 × Type II CompactFlash (CF) slot 1 × Secure Data (SD) memory card slot |
|