Included
* Topcon Hiper II /FH Base Or Rover Receiver P/N: 01-861901-02 [ID-
X2186]
- GPS
- GLONASS
- L1
- L2
- Cinderella
- Code Differential Base
- Code Differential Rover
- RTK Base
- Co-Op Tracking
- Multipath Reduction
- Datums Support
- Magnetic Azimuth
- Geoid Height
- DGPS Mode
- RTCM3 Input
- CMR output
- CMR Input
- Datums Support
- N-Beam
- FH915+ 902 - 928 MHz Radio Modem
- Serviced By A Topcon Authorized Service Center
* Topcon Hiper V Base Or Rover Receiver P/N: 1001137-02 [ID- X2187]
- GPS
- GLONASS
- L1
- L2
- Cinderella
- Code Differential Base
- Code Differential Rover
- RTK Base
- Multipath Reduction
- Datums Support
- Magentic Azimuth
- SBAS
- QZSS
- RTCM 3 Input
- CMR Output
- CMR Input
- Carrier Phase
- TPS Output
- N-Beam
- L2C Support
- FH915+ 902 - 928 MHz Radio Modem
- Serviced By A Topcon Authorized Service Center
* Topcon FC-250 Field Controller Data Collector [ID- X2185]
- Pocket 3D Version 10.0.3
- Range Pole
- GPS (Topcon RTK)
- Optical Prism
- Laser Zone
- Multi Base RTK
- Advanced Coordinates
- Topo survey
- Stake Out
* Topcon CDC68A Battery Charger
* QTY. 2 Antennas
* Topcon 14-008025-01 Cable
* Topcon 14-008016-03 Cable
* Topcon 14-008022-01 Cable
* Stylus
* AC Adapter/Charger
* QTY.2 Power Cords
* User Manual on Cd-ROM
* Hard Carrying Case
- GPS
- GLONASS
- L1
- L2
- Cinderella
- Code Differential Base
- Code Differential Rover
- RTK Base
- Co-Op Tracking
- Multipath Reduction
- Datums Support
- Magnetic Azimuth
- Geoid Height
- DGPS Mode
- RTCM3 Input
- CMR output
- CMR Input
- Datums Support
- N-Beam
- FH915+ 902 - 928 MHz Radio Modem
- Serviced By A Topcon Authorized Service Center
* Topcon Hiper V Base Or Rover Receiver P/N: 1001137-02 [ID- X2187]
- GPS
- GLONASS
- L1
- L2
- Cinderella
- Code Differential Base
- Code Differential Rover
- RTK Base
- Multipath Reduction
- Datums Support
- Magentic Azimuth
- SBAS
- QZSS
- RTCM 3 Input
- CMR Output
- CMR Input
- Carrier Phase
- TPS Output
- N-Beam
- L2C Support
- FH915+ 902 - 928 MHz Radio Modem
- Serviced By A Topcon Authorized Service Center
* Topcon FC-250 Field Controller Data Collector [ID- X2185]
- Pocket 3D Version 10.0.3
- Range Pole
- GPS (Topcon RTK)
- Optical Prism
- Laser Zone
- Multi Base RTK
- Advanced Coordinates
- Topo survey
- Stake Out
* Topcon CDC68A Battery Charger
* QTY. 2 Antennas
* Topcon 14-008025-01 Cable
* Topcon 14-008016-03 Cable
* Topcon 14-008022-01 Cable
* Stylus
* AC Adapter/Charger
* QTY.2 Power Cords
* User Manual on Cd-ROM
* Hard Carrying Case
Details
Topcon FC-250 Field Controller
Data Collector Topcon Field Computer It is only fitting that a field computer this rugged should be designed and built by the world leader in construction positioning instrumentation. Topcon knows what field conditions demand. Building instruments for surveyors for over 75 years, Topcon has the proven experience to know what you need in the field. More importantly, Topcon knows what you demand! Compact, Ruggedized Design If you are looking for a compact controller that provides big-time results, look no further than Topcon’s FC-250. The FC-250 field controller incorporates the graphical Windows Mobile® 6.5 operating system on a crisp, bright, color touch screen display that makes your field data come alive. This powerful operating system, combined with the versatility of dual removable media for data storage and transfer; the easy-access, long-life rechargeable battery; and the compact design that is small on size, but not in performance, makes the FC-250 the perfect field controller for any job. Easy Access CF and SD Media Card Slots Expandability is important to the data collection professional. Extra memory cards can be placed into the protected card slots easily. No tools or extra process needed to access these card slots. Utilize an SD or CF card for data transfer and exchange with other devices. Removable Li-Ion Battery The removable battery allows for quick replacement while in the field. A small, yet powerful battery can be charged externally as a second backup battery. Built-in Bluetooth® and WiFi The FC-250 has built-in Bluetooth® wireless technology and WiFi. Both the Bluetooth® and WiFi components are hardwired inside the device. That leaves the CF card slot open and available for other CF devices. Features:
Topcon Hiper V Dual Frequency GNSS Receiver Compact, cable-free solution with Vanguard Technology for all GNSS positioning applications. Topcon enhances the HiPer family of products by adding Vanguard Technology to the HiPer V. In the early 2000’s Topcon revolutionized GNSS receivers by integrating the design to be compact and light weight. Topcon continues the revolution with Vanguard TechnologyTM. Topcon raises the standard once again by adding Vanguard Technology with 226 channels, Universal Tracking Technology, and the Fence Antenna into the versatile and configurable HiPer V. Universal Tracking Technology is an advanced firmware process that allows each of the 226 channels to be assigned to any satellite signal. Internal Radio Configurations The HiPer V can be configured with the radio and cellular modem that best fits your needs. You can choose from Digital UHF or Spread Spectrum radio. Further, you can choose from HSPA, CDMA, or no cellular module. If you start your HiPer V investment with static only receivers, they can later be upgraded to include radio and cellular modules at one of many Topcon service facilities around the globe. Rugged and Waterproof The HiPer V is designed rugged enough to perform in a real jobsite. It is also waterproof IP67, which means it can be submersed into water. The ports, speaker and battery door are all completely sealed from dust and water. Voice Alerts Voice status messages keep you informed without having to look at the screen of the field controller, or the status lights above your head. Stay safe in traffic situations by looking at oncoming traffic rather than looking for the word “Fixed”. Fence AntennaTM Technology This superior GNSS antenna element is light-weight, rugged, and sensitive enough to track signals in environments where other receivers fail. Obtain lock sooner, and track longer with Fence AntennaTM technology. Features:
Specifications:
Topcon Hiper II Receiver HiPer II The Next Generation Dual Frequency GNSS Receiver Completely Integrated, Advanced GNSS Solution In the early 2000’s, Topcon revolutionized the GNSS positioning technology with the HiPer series of receivers. Its fully integrated design gave the highest agility to RTK rovers ahead of its time, by eliminating extra equipment such as backpacks and cables. Now Topcon raises the industry standard once again by presenting the next-generation of the world’s most popular receiver system – the HiPer II. Smaller. Lighter. Faster. More Affordable. The HiPer II receiver is designed on these clear-cut concepts. This state-of-the-art receiver not only offers further enhanced agility, but also increases receiver performance and user-friendliness as well as the fully customizable structure providing our customers with the maximum flexibility to choose the system options they require. GPS+ Dual Frequency Signal Tracking Topcon’s industry-leading GPS+GLONASS, dual-frequency signal tracking technology offers superior positioning capability over the GPS only receivers. It makes a difference where sky visibility is limited such as in urban canyons or in woodlands, near tall fences or other blockages. Cable-free RTK Base and Rover with an Internal Radio Transmitter/Receiver No more hassles of connecting an external radio. The HiPer II has an optional internal radio with receive and transmit capabilities, eliminating cables from both rovers and base stations. Topcon provides a choice of internal radio from either Spread Spectrum or Digital UHF technologies. Internal GSM/CDMA Modem for Network RTK Designed as a perfect network RTK rover, the HiPer II gives you the option of an internal GSM or CDMA cellular modem. With its completely integrated design, the HiPer II eliminates the hassles of external modems and cables, all in a lightweight, rugged design. Voice Messages for Receiver Status Multi-lingual, clear-tone voice messages notify the users of critical receiver information and status such as satellite signal interruption, radio interference, low battery, low memory and more. This feature improves your efficiency by providing information without having to look at the LED display or controller screen. Tailor the System to Your Own Requirements Fully customizable receiver functionality and a wide variety of options provide the maximum flexibility to tailor the HiPer II system to your own requirements.
Choice of Field Controller Solutions Topcon not only provides the greatest flexibility with the HiPer II receiver design, but also provides you with the choice of field controller. Choose from the small, lightweight FC-25, FC-250, FC-236 or the ultrarugged, full-keyboard model FC-2500 for the ultimate field performance. Durability that Withstands the Severest Condition The magnesium alloy housing provides the maximum ruggedness for the compact and lightweight receiver body. With the IP67 environmental rating, the HiPer II can handle almost any field conditions Long-Life Li-ion Battery Topcon’s HiPer II comes standard with a modern design long-life Lithium Ion battery that is located safely behind a sealed battery cover. Data Storage with SD or SDHC Cards A large volume of static observation data from long term survey projects, long sessions and displacement monitoring can be stored onto the popular SD cards or SDHC cards with 4GB or larger capacity TopSURV 8 Field Controller Software The easy-to-navigate, intuitive user interface of TopSURV software offers all users its full functionality with the shortest learning curve. TopSURV supports all surveying tasks including topo data collection, as-built survey and stakeout. Topcon Tools Complete GNSS Data Management & Post Processing Software The powerful Topcon Tools software suite completes the full Topcon field-to-finish GNSS solution. With comprehensive data manipulation, processing, and analysis, Topcon Tools unlocks the full power of the Topcon GNSS systems solution Specifications:
|